1 | #pragma rtGlobals=1 // Use modern global access method. |
---|
2 | #pragma version=5.0 |
---|
3 | #pragma IgorVersion=6.1 |
---|
4 | |
---|
5 | //**************************** |
---|
6 | // Vers 1.2 090501 |
---|
7 | // |
---|
8 | //**************************** |
---|
9 | // |
---|
10 | // Procedures to perform the "Correct" step during data reduction |
---|
11 | // |
---|
12 | // - ther is olny one procedure to perform the subtractions, and a single |
---|
13 | // parameter flags which subtractions are to be done. Different numbers of |
---|
14 | // attenuators during scattering runs are corrected as described in John's memo, |
---|
15 | // with the note that ONLY method (3) is used, which assumes that 'diffuse' scattering |
---|
16 | // is dominant over 'dark current' (note that 'dark current' = shutter CLOSED) |
---|
17 | // |
---|
18 | // |
---|
19 | //do the CORRECT step based on the answers to emp and bkg subtraction |
---|
20 | //by setting the proper"mode" |
---|
21 | //1 = both emp and bgd subtraction |
---|
22 | //2 = only bgd subtraction |
---|
23 | //3 = only emp subtraction |
---|
24 | //4 = no subtraction |
---|
25 | //additional modes 091301 |
---|
26 | //11 = emp, bgd, drk |
---|
27 | //12 = bgd and drk |
---|
28 | //13 = emp and drk |
---|
29 | //14 = no subtractions |
---|
30 | // |
---|
31 | //******************************** |
---|
32 | |
---|
33 | //unused test procedure for Correct() function |
---|
34 | //must be updated to include "mode" parameter before re-use |
---|
35 | // |
---|
36 | Proc CorrectData() |
---|
37 | |
---|
38 | Variable err |
---|
39 | String type |
---|
40 | |
---|
41 | err = Correct() |
---|
42 | |
---|
43 | if(err) |
---|
44 | Abort "error in Correct" |
---|
45 | endif |
---|
46 | |
---|
47 | //contents are always dumped to COR |
---|
48 | type = "COR" |
---|
49 | |
---|
50 | //need to update the display with "data" from the correct dataFolder |
---|
51 | //reset the current displaytype to "type" |
---|
52 | String/G root:myGlobals:gDataDisplayType=Type |
---|
53 | |
---|
54 | fRawWindowHook() |
---|
55 | |
---|
56 | End |
---|
57 | |
---|
58 | |
---|
59 | //mode describes the type of subtraction that is to be done |
---|
60 | //1 = both emp and bgd subtraction |
---|
61 | //2 = only bgd subtraction |
---|
62 | //3 = only emp subtraction |
---|
63 | //4 = no subtraction |
---|
64 | // |
---|
65 | // + 10 indicates that WORK.DRK is to be used |
---|
66 | // |
---|
67 | //091301 version |
---|
68 | //now simple dispatches to the correct subtraction - logic was too |
---|
69 | //involved to do in one function - unclear and error-prone |
---|
70 | // |
---|
71 | // 081203 version |
---|
72 | // checks for trans==1 in SAM and EMP before dispatching |
---|
73 | // and asks for new value if desired |
---|
74 | // |
---|
75 | Function Correct(mode) |
---|
76 | Variable mode |
---|
77 | |
---|
78 | Variable err=0,trans,newTrans |
---|
79 | |
---|
80 | //switch and dispatch based on the required subtractions |
---|
81 | // always check for SAM data |
---|
82 | err = WorkDataExists("SAM") |
---|
83 | if(err==1) |
---|
84 | return(err) |
---|
85 | endif |
---|
86 | |
---|
87 | |
---|
88 | //check for trans==1 |
---|
89 | NVAR doCheck=root:Packages:NIST:gDoTransCheck |
---|
90 | Wave/Z samR=root:Packages:NIST:SAM:RealsRead |
---|
91 | Wave/Z empR=root:Packages:NIST:EMP:RealsRead |
---|
92 | if(doCheck) |
---|
93 | trans = samR[4] |
---|
94 | newTrans=GetNewTrans(trans,"SAM") //will change value if necessary |
---|
95 | if(numtype(newTrans)==0) |
---|
96 | samR[4] = newTrans //avoid user abort assigning NaN |
---|
97 | endif |
---|
98 | if(trans != newTrans) |
---|
99 | print "Using SAM trans = ",samR[4] |
---|
100 | endif |
---|
101 | endif |
---|
102 | |
---|
103 | //copy SAM information to COR, wiping out the old contents of the COR folder first |
---|
104 | //do this even if no correction is dispatched (if incorrect mode) |
---|
105 | err = CopyWorkContents("SAM","COR") |
---|
106 | if(err==1) |
---|
107 | Abort "No data in SAM, abort from Correct()" |
---|
108 | endif |
---|
109 | |
---|
110 | // Print "dispatching to mode = ",mode |
---|
111 | switch(mode) |
---|
112 | case 1: |
---|
113 | err = WorkDataExists("EMP") |
---|
114 | if(err==1) |
---|
115 | return(err) |
---|
116 | Endif |
---|
117 | if(doCheck) |
---|
118 | trans = empR[4] |
---|
119 | newTrans=GetNewTrans(trans,"EMP") //will change value if necessary |
---|
120 | if(numtype(newTrans)==0) |
---|
121 | empR[4] = newTrans |
---|
122 | endif |
---|
123 | if(trans != newTrans) |
---|
124 | print "Using EMP trans = ",empR[4] |
---|
125 | endif |
---|
126 | endif |
---|
127 | err = WorkDataExists("BGD") |
---|
128 | if(err==1) |
---|
129 | return(err) |
---|
130 | Endif |
---|
131 | err = CorrectMode_1() |
---|
132 | break |
---|
133 | case 2: |
---|
134 | err = WorkDataExists("BGD") |
---|
135 | if(err==1) |
---|
136 | return(err) |
---|
137 | Endif |
---|
138 | err = CorrectMode_2() |
---|
139 | break |
---|
140 | case 3: |
---|
141 | err = WorkDataExists("EMP") |
---|
142 | if(err==1) |
---|
143 | return(err) |
---|
144 | Endif |
---|
145 | if(doCheck) |
---|
146 | trans = empR[4] |
---|
147 | newTrans=GetNewTrans(trans,"EMP") //will change value if necessary |
---|
148 | if(numtype(newTrans)==0) |
---|
149 | empR[4] = newTrans |
---|
150 | endif |
---|
151 | if(trans != newTrans) |
---|
152 | print "Using EMP trans = ",empR[4] |
---|
153 | endif |
---|
154 | endif |
---|
155 | err = CorrectMode_3() |
---|
156 | break |
---|
157 | case 4: |
---|
158 | err = CorrectMode_4() |
---|
159 | break |
---|
160 | case 11: |
---|
161 | err = WorkDataExists("EMP") |
---|
162 | if(err==1) |
---|
163 | return(err) |
---|
164 | Endif |
---|
165 | if(doCheck) |
---|
166 | trans = empR[4] |
---|
167 | newTrans=GetNewTrans(trans,"EMP") //will change value if necessary |
---|
168 | if(numtype(newTrans)==0) |
---|
169 | empR[4] = newTrans |
---|
170 | endif |
---|
171 | if(trans != newTrans) |
---|
172 | print "Using EMP trans = ",empR[4] |
---|
173 | endif |
---|
174 | endif |
---|
175 | err = WorkDataExists("BGD") |
---|
176 | if(err==1) |
---|
177 | return(err) |
---|
178 | Endif |
---|
179 | err = WorkDataExists("DRK") |
---|
180 | if(err==1) |
---|
181 | return(err) |
---|
182 | Endif |
---|
183 | err = CorrectMode_11() |
---|
184 | break |
---|
185 | case 12: |
---|
186 | err = WorkDataExists("BGD") |
---|
187 | if(err==1) |
---|
188 | return(err) |
---|
189 | Endif |
---|
190 | err = WorkDataExists("DRK") |
---|
191 | if(err==1) |
---|
192 | return(err) |
---|
193 | Endif |
---|
194 | err = CorrectMode_12() |
---|
195 | break |
---|
196 | case 13: |
---|
197 | err = WorkDataExists("EMP") |
---|
198 | if(err==1) |
---|
199 | return(err) |
---|
200 | Endif |
---|
201 | if(doCheck) |
---|
202 | trans = empR[4] |
---|
203 | newTrans=GetNewTrans(trans,"EMP") //will change value if necessary |
---|
204 | if(numtype(newTrans)==0) |
---|
205 | empR[4] = newTrans |
---|
206 | endif |
---|
207 | if(trans != newTrans) |
---|
208 | print "Using EMP trans = ",empR[4] |
---|
209 | endif |
---|
210 | endif |
---|
211 | err = WorkDataExists("DRK") |
---|
212 | if(err==1) |
---|
213 | return(err) |
---|
214 | Endif |
---|
215 | err = CorrectMode_13() |
---|
216 | break |
---|
217 | case 14: |
---|
218 | err = WorkDataExists("DRK") |
---|
219 | if(err==1) |
---|
220 | return(err) |
---|
221 | Endif |
---|
222 | err = CorrectMode_14() |
---|
223 | break |
---|
224 | default: //something wrong |
---|
225 | Print "Incorrect mode in Correct()" |
---|
226 | return(1) //error |
---|
227 | endswitch |
---|
228 | |
---|
229 | //calculation attempted, return the result |
---|
230 | return(err) |
---|
231 | End |
---|
232 | |
---|
233 | // subtraction of bot EMP and BGD from SAM |
---|
234 | // data exists, checked by dispatch routine |
---|
235 | // |
---|
236 | Function CorrectMode_1() |
---|
237 | |
---|
238 | //create the necessary wave references |
---|
239 | WAVE sam_data=$"root:Packages:NIST:SAM:data" |
---|
240 | WAVE sam_reals=$"root:Packages:NIST:SAM:realsread" |
---|
241 | WAVE sam_ints=$"root:Packages:NIST:SAM:integersread" |
---|
242 | WAVE/T sam_text=$"root:Packages:NIST:SAM:textread" |
---|
243 | WAVE bgd_data=$"root:Packages:NIST:BGD:data" |
---|
244 | WAVE bgd_reals=$"root:Packages:NIST:BGD:realsread" |
---|
245 | WAVE bgd_ints=$"root:Packages:NIST:BGD:integersread" |
---|
246 | WAVE/T bgd_text=$"root:Packages:NIST:BGD:textread" |
---|
247 | WAVE emp_data=$"root:Packages:NIST:EMP:data" |
---|
248 | WAVE emp_reals=$"root:Packages:NIST:EMP:realsread" |
---|
249 | WAVE emp_ints=$"root:Packages:NIST:EMP:integersread" |
---|
250 | WAVE/T emp_text=$"root:Packages:NIST:EMP:textread" |
---|
251 | WAVE cor_data=$"root:Packages:NIST:COR:data" |
---|
252 | WAVE/T cor_text=$"root:Packages:NIST:COR:textread" |
---|
253 | |
---|
254 | //get sam and bgd attenuation factors |
---|
255 | String fileStr="" |
---|
256 | Variable lambda,attenNo,sam_AttenFactor,bgd_attenFactor,emp_AttenFactor |
---|
257 | Variable tmonsam,fsam,fbgd,xshift,yshift,rsam,csam,rbgd,cbgd,tmonbgd |
---|
258 | Variable wcen=0.001,tsam,temp,remp,cemp,tmonemp,femp |
---|
259 | fileStr = sam_text[3] |
---|
260 | lambda = sam_reals[26] |
---|
261 | attenNo = sam_reals[3] |
---|
262 | sam_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
263 | fileStr = bgd_text[3] |
---|
264 | lambda = bgd_reals[26] |
---|
265 | attenNo = bgd_reals[3] |
---|
266 | bgd_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
267 | fileStr = emp_text[3] |
---|
268 | lambda = emp_reals[26] |
---|
269 | attenNo = emp_reals[3] |
---|
270 | emp_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
271 | |
---|
272 | //get relative monitor counts (should all be 10^8, since normalized in add step) |
---|
273 | tmonsam = sam_reals[0] //monitor count in SAM |
---|
274 | tsam = sam_reals[4] //SAM transmission |
---|
275 | csam = sam_reals[16] //x center |
---|
276 | rsam = sam_reals[17] //beam (x,y) define center of corrected field |
---|
277 | tmonbgd = bgd_reals[0] //monitor count in BGD |
---|
278 | cbgd = bgd_reals[16] |
---|
279 | rbgd = bgd_reals[17] |
---|
280 | tmonemp = emp_reals[0] //monitor count in EMP |
---|
281 | temp = emp_reals[4] //trans emp |
---|
282 | cemp = emp_reals[16] //beamcenter of EMP |
---|
283 | remp = emp_reals[17] |
---|
284 | |
---|
285 | if(temp==0) |
---|
286 | DoAlert 0,"Empty Cell transmission was zero. It has been reset to one for the subtraction" |
---|
287 | temp=1 |
---|
288 | Endif |
---|
289 | |
---|
290 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
291 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
292 | |
---|
293 | //get the shifted data arrays, EMP and BGD, each relative to SAM |
---|
294 | Make/D/O/N=(pixelsX,pixelsY) cor1,bgd_temp,noadd_bgd,emp_temp,noadd_emp |
---|
295 | xshift = cbgd-csam |
---|
296 | yshift = rbgd-rsam |
---|
297 | if(abs(xshift) <= wcen) |
---|
298 | xshift = 0 |
---|
299 | Endif |
---|
300 | if(abs(yshift) <= wcen) |
---|
301 | yshift = 0 |
---|
302 | Endif |
---|
303 | GetShiftedArray(bgd_data,bgd_temp,noadd_bgd,xshift,yshift) //bgd_temp |
---|
304 | |
---|
305 | xshift = cemp-csam |
---|
306 | yshift = remp-rsam |
---|
307 | if(abs(xshift) <= wcen) |
---|
308 | xshift = 0 |
---|
309 | Endif |
---|
310 | if(abs(yshift) <= wcen) |
---|
311 | yshift = 0 |
---|
312 | Endif |
---|
313 | GetShiftedArray(emp_data,emp_temp,noadd_emp,xshift,yshift) //emp_temp |
---|
314 | |
---|
315 | //do the subtraction |
---|
316 | fsam=1 |
---|
317 | femp = tmonsam/tmonemp //this should be ==1 since normalized files |
---|
318 | fbgd = tmonsam/tmonbgd //this should be ==1 since normalized files |
---|
319 | cor1 = fsam*sam_data/sam_attenFactor - fbgd*bgd_temp/bgd_attenFactor |
---|
320 | cor1 -= (tsam/temp)*(femp*emp_temp/emp_attenFactor - fbgd*bgd_temp/bgd_attenFactor) |
---|
321 | cor1 *= noadd_bgd*noadd_emp //zero out the array mismatch values |
---|
322 | |
---|
323 | //we're done, get out w/no error |
---|
324 | //set the COR data to the result |
---|
325 | cor_data = cor1 |
---|
326 | //update COR header |
---|
327 | cor_text[1] = date() + " " + time() //date + time stamp |
---|
328 | |
---|
329 | KillWaves/Z cor1,bgd_temp,noadd_bgd,emp_temp,noadd_emp |
---|
330 | SetDataFolder root: |
---|
331 | Return(0) |
---|
332 | End |
---|
333 | |
---|
334 | //background only |
---|
335 | // existence of data checked by dispatching routine |
---|
336 | // data has already been copied to COR folder |
---|
337 | Function CorrectMode_2() |
---|
338 | |
---|
339 | //create the necessary wave references |
---|
340 | WAVE sam_data=$"root:Packages:NIST:SAM:data" |
---|
341 | WAVE sam_reals=$"root:Packages:NIST:SAM:realsread" |
---|
342 | WAVE sam_ints=$"root:Packages:NIST:SAM:integersread" |
---|
343 | WAVE/T sam_text=$"root:Packages:NIST:SAM:textread" |
---|
344 | WAVE bgd_data=$"root:Packages:NIST:BGD:data" |
---|
345 | WAVE bgd_reals=$"root:Packages:NIST:BGD:realsread" |
---|
346 | WAVE bgd_ints=$"root:Packages:NIST:BGD:integersread" |
---|
347 | WAVE/T bgd_text=$"root:Packages:NIST:BGD:textread" |
---|
348 | WAVE cor_data=$"root:Packages:NIST:COR:data" |
---|
349 | WAVE/T cor_text=$"root:Packages:NIST:COR:textread" |
---|
350 | |
---|
351 | //get sam and bgd attenuation factors |
---|
352 | String fileStr="" |
---|
353 | Variable lambda,attenNo,sam_AttenFactor,bgd_attenFactor |
---|
354 | Variable tmonsam,fsam,fbgd,xshift,yshift,rsam,csam,rbgd,cbgd,tmonbgd |
---|
355 | Variable wcen=0.001 |
---|
356 | fileStr = sam_text[3] |
---|
357 | lambda = sam_reals[26] |
---|
358 | attenNo = sam_reals[3] |
---|
359 | sam_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
360 | fileStr = bgd_text[3] |
---|
361 | lambda = bgd_reals[26] |
---|
362 | attenNo = bgd_reals[3] |
---|
363 | bgd_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
364 | |
---|
365 | //Print "atten = ",sam_attenFactor,bgd_attenFactor |
---|
366 | |
---|
367 | //get relative monitor counts (should all be 10^8, since normalized in add step) |
---|
368 | tmonsam = sam_reals[0] //monitor count in SAM |
---|
369 | csam = sam_reals[16] //x center |
---|
370 | rsam = sam_reals[17] //beam (x,y) define center of corrected field |
---|
371 | tmonbgd = bgd_reals[0] //monitor count in BGD |
---|
372 | cbgd = bgd_reals[16] |
---|
373 | rbgd = bgd_reals[17] |
---|
374 | |
---|
375 | // set up beamcenter shift, relative to SAM |
---|
376 | xshift = cbgd-csam |
---|
377 | yshift = rbgd-rsam |
---|
378 | if(abs(xshift) <= wcen) |
---|
379 | xshift = 0 |
---|
380 | Endif |
---|
381 | if(abs(yshift) <= wcen) |
---|
382 | yshift = 0 |
---|
383 | Endif |
---|
384 | |
---|
385 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
386 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
387 | //get shifted data arrays, relative to SAM |
---|
388 | Make/D/O/N=(pixelsX,pixelsY) cor1,bgd_temp,noadd_bgd //temp arrays |
---|
389 | GetShiftedArray(bgd_data,bgd_temp,noadd_bgd,xshift,yshift) //bgd_temp is the BGD |
---|
390 | |
---|
391 | //do the sam-bgd subtraction, deposit result in cor1 |
---|
392 | fsam = 1 |
---|
393 | fbgd = tmonsam/tmonbgd //this should be ==1 since normalized files |
---|
394 | |
---|
395 | //print "fsam,fbgd = ",fsam,fbgd |
---|
396 | |
---|
397 | cor1 = fsam*sam_data/sam_AttenFactor - fbgd*bgd_temp/bgd_AttenFactor |
---|
398 | cor1 *= noadd_bgd //zeros out regions where arrays do not overlap, one otherwise |
---|
399 | |
---|
400 | //we're done, get out w/no error |
---|
401 | //set the COR_data to the result |
---|
402 | cor_data = cor1 |
---|
403 | //update COR header |
---|
404 | cor_text[1] = date() + " " + time() //date + time stamp |
---|
405 | |
---|
406 | KillWaves/Z cor1,bgd_temp,noadd_bgd |
---|
407 | SetDataFolder root: |
---|
408 | Return(0) |
---|
409 | End |
---|
410 | |
---|
411 | // empty subtraction only |
---|
412 | // data does exist, checked by dispatch routine |
---|
413 | // |
---|
414 | Function CorrectMode_3() |
---|
415 | //create the necessary wave references |
---|
416 | WAVE sam_data=$"root:Packages:NIST:SAM:data" |
---|
417 | WAVE sam_reals=$"root:Packages:NIST:SAM:realsread" |
---|
418 | WAVE sam_ints=$"root:Packages:NIST:SAM:integersread" |
---|
419 | WAVE/T sam_text=$"root:Packages:NIST:SAM:textread" |
---|
420 | WAVE emp_data=$"root:Packages:NIST:EMP:data" |
---|
421 | WAVE emp_reals=$"root:Packages:NIST:EMP:realsread" |
---|
422 | WAVE emp_ints=$"root:Packages:NIST:EMP:integersread" |
---|
423 | WAVE/T emp_text=$"root:Packages:NIST:EMP:textread" |
---|
424 | WAVE cor_data=$"root:Packages:NIST:COR:data" |
---|
425 | WAVE/T cor_text=$"root:Packages:NIST:COR:textread" |
---|
426 | |
---|
427 | //get sam and bgd attenuation factors |
---|
428 | String fileStr="" |
---|
429 | Variable lambda,attenNo,sam_AttenFactor,emp_attenFactor |
---|
430 | Variable tmonsam,fsam,femp,xshift,yshift,rsam,csam,remp,cemp,tmonemp |
---|
431 | Variable wcen=0.001,tsam,temp |
---|
432 | fileStr = sam_text[3] |
---|
433 | lambda = sam_reals[26] |
---|
434 | attenNo = sam_reals[3] |
---|
435 | sam_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
436 | fileStr = emp_text[3] |
---|
437 | lambda = emp_reals[26] |
---|
438 | attenNo = emp_reals[3] |
---|
439 | emp_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
440 | |
---|
441 | //get relative monitor counts (should all be 10^8, since normalized in add step) |
---|
442 | tmonsam = sam_reals[0] //monitor count in SAM |
---|
443 | tsam = sam_reals[4] //SAM transmission |
---|
444 | csam = sam_reals[16] //x center |
---|
445 | rsam = sam_reals[17] //beam (x,y) define center of corrected field |
---|
446 | tmonemp = emp_reals[0] //monitor count in EMP |
---|
447 | temp = emp_reals[4] //trans emp |
---|
448 | cemp = emp_reals[16] //beamcenter of EMP |
---|
449 | remp = emp_reals[17] |
---|
450 | |
---|
451 | if(temp==0) |
---|
452 | DoAlert 0,"Empty Cell transmission was zero. It has been reset to one for the subtraction" |
---|
453 | temp=1 |
---|
454 | Endif |
---|
455 | |
---|
456 | //Print "rbgd,cbgd = ",rbgd,cbgd |
---|
457 | // set up beamcenter shift, relative to SAM |
---|
458 | xshift = cemp-csam |
---|
459 | yshift = remp-rsam |
---|
460 | if(abs(xshift) <= wcen) |
---|
461 | xshift = 0 |
---|
462 | Endif |
---|
463 | if(abs(yshift) <= wcen) |
---|
464 | yshift = 0 |
---|
465 | Endif |
---|
466 | |
---|
467 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
468 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
469 | //get shifted data arrays, relative to SAM |
---|
470 | Make/D/O/N=(pixelsX,pixelsY) cor1,emp_temp,noadd_emp //temp arrays |
---|
471 | GetShiftedArray(emp_data,emp_temp,noadd_emp,xshift,yshift) //emp_temp is the EMP |
---|
472 | |
---|
473 | //do the sam-bgd subtraction, deposit result in cor1 |
---|
474 | fsam = 1 |
---|
475 | femp = tmonsam/tmonemp //this should be ==1 since normalized files |
---|
476 | |
---|
477 | cor1 = fsam*sam_data/sam_AttenFactor - femp*(tsam/temp)*emp_temp/emp_AttenFactor |
---|
478 | cor1 *= noadd_emp //zeros out regions where arrays do not overlap, one otherwise |
---|
479 | |
---|
480 | //we're done, get out w/no error |
---|
481 | //set the COR data to the result |
---|
482 | cor_data = cor1 |
---|
483 | //update COR header |
---|
484 | cor_text[1] = date() + " " + time() //date + time stamp |
---|
485 | |
---|
486 | KillWaves/Z cor1,emp_temp,noadd_emp |
---|
487 | SetDataFolder root: |
---|
488 | Return(0) |
---|
489 | End |
---|
490 | |
---|
491 | // NO subtraction - simply rescales for attenuators |
---|
492 | // SAM data does exist, checked by dispatch routine |
---|
493 | // |
---|
494 | // !! moves data to COR folder, since the data has been corrected, by rescaling |
---|
495 | // |
---|
496 | Function CorrectMode_4() |
---|
497 | //create the necessary wave references |
---|
498 | WAVE sam_data=$"root:Packages:NIST:SAM:data" |
---|
499 | WAVE sam_reals=$"root:Packages:NIST:SAM:realsread" |
---|
500 | WAVE sam_ints=$"root:Packages:NIST:SAM:integersread" |
---|
501 | WAVE/T sam_text=$"root:Packages:NIST:SAM:textread" |
---|
502 | |
---|
503 | WAVE cor_data=$"root:Packages:NIST:COR:data" |
---|
504 | WAVE/T cor_text=$"root:Packages:NIST:COR:textread" |
---|
505 | |
---|
506 | //get sam and bgd attenuation factors |
---|
507 | String fileStr="" |
---|
508 | Variable lambda,attenNo,sam_AttenFactor |
---|
509 | fileStr = sam_text[3] |
---|
510 | lambda = sam_reals[26] |
---|
511 | attenNo = sam_reals[3] |
---|
512 | sam_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
513 | |
---|
514 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
515 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
516 | Make/D/O/N=(pixelsX,pixelsY) cor1 |
---|
517 | |
---|
518 | cor1 = sam_data/sam_AttenFactor //simply rescale the data |
---|
519 | |
---|
520 | //we're done, get out w/no error |
---|
521 | //set the COR data to the result |
---|
522 | cor_data = cor1 |
---|
523 | //update COR header |
---|
524 | cor_text[1] = date() + " " + time() //date + time stamp |
---|
525 | |
---|
526 | KillWaves/Z cor1 |
---|
527 | SetDataFolder root: |
---|
528 | Return(0) |
---|
529 | End |
---|
530 | |
---|
531 | Function CorrectMode_11() |
---|
532 | //create the necessary wave references |
---|
533 | WAVE sam_data=$"root:Packages:NIST:SAM:data" |
---|
534 | WAVE sam_reals=$"root:Packages:NIST:SAM:realsread" |
---|
535 | WAVE sam_ints=$"root:Packages:NIST:SAM:integersread" |
---|
536 | WAVE/T sam_text=$"root:Packages:NIST:SAM:textread" |
---|
537 | WAVE bgd_data=$"root:Packages:NIST:BGD:data" |
---|
538 | WAVE bgd_reals=$"root:Packages:NIST:BGD:realsread" |
---|
539 | WAVE bgd_ints=$"root:Packages:NIST:BGD:integersread" |
---|
540 | WAVE/T bgd_text=$"root:Packages:NIST:BGD:textread" |
---|
541 | WAVE emp_data=$"root:Packages:NIST:EMP:data" |
---|
542 | WAVE emp_reals=$"root:Packages:NIST:EMP:realsread" |
---|
543 | WAVE emp_ints=$"root:Packages:NIST:EMP:integersread" |
---|
544 | WAVE/T emp_text=$"root:Packages:NIST:EMP:textread" |
---|
545 | WAVE drk_data=$"root:Packages:NIST:DRK:data" |
---|
546 | WAVE drk_reals=$"root:Packages:NIST:DRK:realsread" |
---|
547 | WAVE drk_ints=$"root:Packages:NIST:DRK:integersread" |
---|
548 | WAVE/T drk_text=$"root:Packages:NIST:DRK:textread" |
---|
549 | WAVE cor_data=$"root:Packages:NIST:COR:data" |
---|
550 | WAVE/T cor_text=$"root:Packages:NIST:COR:textread" |
---|
551 | |
---|
552 | //get sam and bgd attenuation factors |
---|
553 | String fileStr="" |
---|
554 | Variable lambda,attenNo,sam_AttenFactor,bgd_attenFactor,emp_AttenFactor |
---|
555 | Variable tmonsam,fsam,fbgd,xshift,yshift,rsam,csam,rbgd,cbgd,tmonbgd |
---|
556 | Variable wcen=0.001,tsam,temp,remp,cemp,tmonemp,femp,time_sam,time_drk,savmon_sam |
---|
557 | fileStr = sam_text[3] |
---|
558 | lambda = sam_reals[26] |
---|
559 | attenNo = sam_reals[3] |
---|
560 | sam_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
561 | fileStr = bgd_text[3] |
---|
562 | lambda = bgd_reals[26] |
---|
563 | attenNo = bgd_reals[3] |
---|
564 | bgd_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
565 | fileStr = emp_text[3] |
---|
566 | lambda = emp_reals[26] |
---|
567 | attenNo = emp_reals[3] |
---|
568 | emp_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
569 | |
---|
570 | //get relative monitor counts (should all be 10^8, since normalized in add step) |
---|
571 | tmonsam = sam_reals[0] //monitor count in SAM |
---|
572 | tsam = sam_reals[4] //SAM transmission |
---|
573 | csam = sam_reals[16] //x center |
---|
574 | rsam = sam_reals[17] //beam (x,y) define center of corrected field |
---|
575 | tmonbgd = bgd_reals[0] //monitor count in BGD |
---|
576 | cbgd = bgd_reals[16] |
---|
577 | rbgd = bgd_reals[17] |
---|
578 | tmonemp = emp_reals[0] //monitor count in EMP |
---|
579 | temp = emp_reals[4] //trans emp |
---|
580 | cemp = emp_reals[16] //beamcenter of EMP |
---|
581 | remp = emp_reals[17] |
---|
582 | savmon_sam=sam_reals[1] //true monitor count in SAM |
---|
583 | time_sam = sam_ints[2] //count time SAM |
---|
584 | time_drk = drk_ints[2] //drk count time |
---|
585 | |
---|
586 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
587 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
588 | //rescale drk to sam cnt time and then multiply by the same monitor scaling as SAM |
---|
589 | Make/D/O/N=(pixelsX,pixelsY) drk_temp |
---|
590 | drk_temp = drk_data*(time_sam/time_drk)*(tmonsam/savmon_sam) |
---|
591 | |
---|
592 | if(temp==0) |
---|
593 | DoAlert 0,"Empty Cell transmission was zero. It has been reset to one for the subtraction" |
---|
594 | temp=1 |
---|
595 | Endif |
---|
596 | |
---|
597 | //get the shifted data arrays, EMP and BGD, each relative to SAM |
---|
598 | Make/D/O/N=(pixelsX,pixelsY) cor1,bgd_temp,noadd_bgd,emp_temp,noadd_emp |
---|
599 | xshift = cbgd-csam |
---|
600 | yshift = rbgd-rsam |
---|
601 | if(abs(xshift) <= wcen) |
---|
602 | xshift = 0 |
---|
603 | Endif |
---|
604 | if(abs(yshift) <= wcen) |
---|
605 | yshift = 0 |
---|
606 | Endif |
---|
607 | GetShiftedArray(bgd_data,bgd_temp,noadd_bgd,xshift,yshift) //bgd_temp |
---|
608 | |
---|
609 | xshift = cemp-csam |
---|
610 | yshift = remp-rsam |
---|
611 | if(abs(xshift) <= wcen) |
---|
612 | xshift = 0 |
---|
613 | Endif |
---|
614 | if(abs(yshift) <= wcen) |
---|
615 | yshift = 0 |
---|
616 | Endif |
---|
617 | GetShiftedArray(emp_data,emp_temp,noadd_emp,xshift,yshift) //emp_temp |
---|
618 | //always ignore the DRK center shift |
---|
619 | |
---|
620 | //do the subtraction |
---|
621 | fsam=1 |
---|
622 | femp = tmonsam/tmonemp //this should be ==1 since normalized files |
---|
623 | fbgd = tmonsam/tmonbgd //this should be ==1 since normalized files |
---|
624 | cor1 = fsam*sam_data/sam_attenFactor |
---|
625 | cor1 -= (tsam/temp)*(femp*emp_temp/emp_attenFactor - fbgd*bgd_temp/bgd_attenFactor) |
---|
626 | cor1 -= (fbgd*bgd_temp/bgd_attenFactor - drk_temp) |
---|
627 | cor1 -= drk_temp/sam_attenFactor |
---|
628 | cor1 *= noadd_bgd*noadd_emp //zero out the array mismatch values |
---|
629 | |
---|
630 | //we're done, get out w/no error |
---|
631 | //set the COR data to the result |
---|
632 | cor_data = cor1 |
---|
633 | //update COR header |
---|
634 | cor_text[1] = date() + " " + time() //date + time stamp |
---|
635 | |
---|
636 | KillWaves/Z cor1,bgd_temp,noadd_bgd,emp_temp,noadd_emp,drk_temp |
---|
637 | SetDataFolder root: |
---|
638 | Return(0) |
---|
639 | End |
---|
640 | |
---|
641 | //bgd and drk subtraction |
---|
642 | // |
---|
643 | Function CorrectMode_12() |
---|
644 | //create the necessary wave references |
---|
645 | WAVE sam_data=$"root:Packages:NIST:SAM:data" |
---|
646 | WAVE sam_reals=$"root:Packages:NIST:SAM:realsread" |
---|
647 | WAVE sam_ints=$"root:Packages:NIST:SAM:integersread" |
---|
648 | WAVE/T sam_text=$"root:Packages:NIST:SAM:textread" |
---|
649 | WAVE bgd_data=$"root:Packages:NIST:BGD:data" |
---|
650 | WAVE bgd_reals=$"root:Packages:NIST:BGD:realsread" |
---|
651 | WAVE bgd_ints=$"root:Packages:NIST:BGD:integersread" |
---|
652 | WAVE/T bgd_text=$"root:Packages:NIST:BGD:textread" |
---|
653 | WAVE drk_data=$"root:Packages:NIST:DRK:data" |
---|
654 | WAVE drk_reals=$"root:Packages:NIST:DRK:realsread" |
---|
655 | WAVE drk_ints=$"root:Packages:NIST:DRK:integersread" |
---|
656 | WAVE/T drk_text=$"root:Packages:NIST:DRK:textread" |
---|
657 | WAVE cor_data=$"root:Packages:NIST:COR:data" |
---|
658 | WAVE/T cor_text=$"root:Packages:NIST:COR:textread" |
---|
659 | |
---|
660 | //get sam and bgd attenuation factors |
---|
661 | String fileStr="" |
---|
662 | Variable lambda,attenNo,sam_AttenFactor,bgd_attenFactor |
---|
663 | Variable tmonsam,fsam,fbgd,xshift,yshift,rsam,csam,rbgd,cbgd,tmonbgd |
---|
664 | Variable wcen=0.001,time_drk,time_sam,savmon_sam,tsam |
---|
665 | fileStr = sam_text[3] |
---|
666 | lambda = sam_reals[26] |
---|
667 | attenNo = sam_reals[3] |
---|
668 | sam_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
669 | fileStr = bgd_text[3] |
---|
670 | lambda = bgd_reals[26] |
---|
671 | attenNo = bgd_reals[3] |
---|
672 | bgd_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
673 | |
---|
674 | //get relative monitor counts (should all be 10^8, since normalized in add step) |
---|
675 | tmonsam = sam_reals[0] //monitor count in SAM |
---|
676 | tsam = sam_reals[4] //SAM transmission |
---|
677 | csam = sam_reals[16] //x center |
---|
678 | rsam = sam_reals[17] //beam (x,y) define center of corrected field |
---|
679 | tmonbgd = bgd_reals[0] //monitor count in BGD |
---|
680 | cbgd = bgd_reals[16] |
---|
681 | rbgd = bgd_reals[17] |
---|
682 | savmon_sam=sam_reals[1] //true monitor count in SAM |
---|
683 | time_sam = sam_ints[2] //count time SAM |
---|
684 | time_drk = drk_ints[2] //drk count time |
---|
685 | |
---|
686 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
687 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
688 | //rescale drk to sam cnt time and then multiply by the same monitor scaling as SAM |
---|
689 | Make/D/O/N=(pixelsX,pixelsY) drk_temp |
---|
690 | drk_temp = drk_data*(time_sam/time_drk)*(tmonsam/savmon_sam) |
---|
691 | |
---|
692 | // set up beamcenter shift, relative to SAM |
---|
693 | xshift = cbgd-csam |
---|
694 | yshift = rbgd-rsam |
---|
695 | if(abs(xshift) <= wcen) |
---|
696 | xshift = 0 |
---|
697 | Endif |
---|
698 | if(abs(yshift) <= wcen) |
---|
699 | yshift = 0 |
---|
700 | Endif |
---|
701 | //get shifted data arrays, relative to SAM |
---|
702 | Make/D/O/N=(pixelsX,pixelsY) cor1,bgd_temp,noadd_bgd //temp arrays |
---|
703 | GetShiftedArray(bgd_data,bgd_temp,noadd_bgd,xshift,yshift) //bgd_temp is the BGD |
---|
704 | //always ignore the DRK center shift |
---|
705 | |
---|
706 | //do the sam-bgd subtraction, deposit result in cor1 |
---|
707 | fsam = 1 |
---|
708 | fbgd = tmonsam/tmonbgd //this should be ==1 since normalized files |
---|
709 | |
---|
710 | cor1 = fsam*sam_data/sam_AttenFactor + fbgd*tsam*bgd_temp/bgd_AttenFactor |
---|
711 | cor1 += -1*(fbgd*bgd_temp/bgd_attenFactor - drk_temp) - drk_temp/sam_attenFactor |
---|
712 | cor1 *= noadd_bgd //zeros out regions where arrays do not overlap, one otherwise |
---|
713 | |
---|
714 | //we're done, get out w/no error |
---|
715 | //set the COR_data to the result |
---|
716 | cor_data = cor1 |
---|
717 | //update COR header |
---|
718 | cor_text[1] = date() + " " + time() //date + time stamp |
---|
719 | |
---|
720 | // KillWaves/Z cor1,bgd_temp,noadd_bgd,drk_temp |
---|
721 | SetDataFolder root: |
---|
722 | Return(0) |
---|
723 | End |
---|
724 | |
---|
725 | //EMP and DRK subtractions |
---|
726 | // all data exists, DRK is on a time basis (noNorm) |
---|
727 | //scale DRK by monitor count scaling factor and the ratio of couting times |
---|
728 | //to place the DRK file on equal footing |
---|
729 | Function CorrectMode_13() |
---|
730 | //create the necessary wave references |
---|
731 | WAVE sam_data=$"root:Packages:NIST:SAM:data" |
---|
732 | WAVE sam_reals=$"root:Packages:NIST:SAM:realsread" |
---|
733 | WAVE sam_ints=$"root:Packages:NIST:SAM:integersread" |
---|
734 | WAVE/T sam_text=$"root:Packages:NIST:SAM:textread" |
---|
735 | WAVE emp_data=$"root:Packages:NIST:EMP:data" |
---|
736 | WAVE emp_reals=$"root:Packages:NIST:EMP:realsread" |
---|
737 | WAVE emp_ints=$"root:Packages:NIST:EMP:integersread" |
---|
738 | WAVE/T emp_text=$"root:Packages:NIST:EMP:textread" |
---|
739 | WAVE drk_data=$"root:DRK:data" |
---|
740 | WAVE drk_reals=$"root:DRK:realsread" |
---|
741 | WAVE drk_ints=$"root:DRK:integersread" |
---|
742 | WAVE/T drk_text=$"root:DRK:textread" |
---|
743 | WAVE cor_data=$"root:Packages:NIST:COR:data" |
---|
744 | WAVE/T cor_text=$"root:Packages:NIST:COR:textread" |
---|
745 | |
---|
746 | //get sam and bgd attenuation factors (DRK irrelevant) |
---|
747 | String fileStr="" |
---|
748 | Variable lambda,attenNo,sam_AttenFactor,emp_attenFactor |
---|
749 | Variable tmonsam,fsam,femp,xshift,yshift,rsam,csam,remp,cemp,tmonemp |
---|
750 | Variable wcen=0.001,tsam,temp,savmon_sam,time_sam,time_drk |
---|
751 | fileStr = sam_text[3] |
---|
752 | lambda = sam_reals[26] |
---|
753 | attenNo = sam_reals[3] |
---|
754 | sam_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
755 | fileStr = emp_text[3] |
---|
756 | lambda = emp_reals[26] |
---|
757 | attenNo = emp_reals[3] |
---|
758 | emp_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
759 | |
---|
760 | //get relative monitor counts (should all be 10^8, since normalized in add step) |
---|
761 | tmonsam = sam_reals[0] //monitor count in SAM |
---|
762 | tsam = sam_reals[4] //SAM transmission |
---|
763 | csam = sam_reals[16] //x center |
---|
764 | rsam = sam_reals[17] //beam (x,y) define center of corrected field |
---|
765 | tmonemp = emp_reals[0] //monitor count in EMP |
---|
766 | temp = emp_reals[4] //trans emp |
---|
767 | cemp = emp_reals[16] //beamcenter of EMP |
---|
768 | remp = emp_reals[17] |
---|
769 | savmon_sam=sam_reals[1] //true monitor count in SAM |
---|
770 | time_sam = sam_ints[2] //count time SAM |
---|
771 | time_drk = drk_ints[2] //drk count time |
---|
772 | |
---|
773 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
774 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
775 | //rescale drk to sam cnt time and then multiply by the same monitor scaling as SAM |
---|
776 | Make/D/O/N=(pixelsX,pixelsY) drk_temp |
---|
777 | drk_temp = drk_data*(time_sam/time_drk)*(tmonsam/savmon_sam) |
---|
778 | |
---|
779 | if(temp==0) |
---|
780 | DoAlert 0,"Empty Cell transmission was zero. It has been reset to one for the subtraction" |
---|
781 | temp=1 |
---|
782 | Endif |
---|
783 | |
---|
784 | //Print "rbgd,cbgd = ",rbgd,cbgd |
---|
785 | // set up beamcenter shift, relative to SAM |
---|
786 | xshift = cemp-csam |
---|
787 | yshift = remp-rsam |
---|
788 | if(abs(xshift) <= wcen) |
---|
789 | xshift = 0 |
---|
790 | Endif |
---|
791 | if(abs(yshift) <= wcen) |
---|
792 | yshift = 0 |
---|
793 | Endif |
---|
794 | //get shifted data arrays, relative to SAM |
---|
795 | Make/D/O/N=(pixelsX,pixelsY) cor1,emp_temp,noadd_emp //temp arrays |
---|
796 | GetShiftedArray(emp_data,emp_temp,noadd_emp,xshift,yshift) //emp_temp is the EMP |
---|
797 | //always ignore beamcenter shift for DRK |
---|
798 | |
---|
799 | //do the sam-bgd subtraction, deposit result in cor1 |
---|
800 | fsam = 1 |
---|
801 | femp = tmonsam/tmonemp //this should be ==1 since normalized files |
---|
802 | |
---|
803 | cor1 = fsam*sam_data/sam_AttenFactor - femp*(tsam/temp)*emp_temp/emp_AttenFactor |
---|
804 | cor1 += drk_temp - drk_temp/sam_attenFactor |
---|
805 | cor1 *= noadd_emp //zeros out regions where arrays do not overlap, one otherwise |
---|
806 | |
---|
807 | //we're done, get out w/no error |
---|
808 | //set the COR data to the result |
---|
809 | cor_data = cor1 |
---|
810 | //update COR header |
---|
811 | cor_text[1] = date() + " " + time() //date + time stamp |
---|
812 | |
---|
813 | KillWaves/Z cor1,emp_temp,noadd_emp,drk_temp |
---|
814 | SetDataFolder root: |
---|
815 | Return(0) |
---|
816 | End |
---|
817 | |
---|
818 | // ONLY drk subtraction |
---|
819 | // |
---|
820 | Function CorrectMode_14() |
---|
821 | //create the necessary wave references |
---|
822 | WAVE sam_data=$"root:Packages:NIST:SAM:data" |
---|
823 | WAVE sam_reals=$"root:Packages:NIST:SAM:realsread" |
---|
824 | WAVE sam_ints=$"root:Packages:NIST:SAM:integersread" |
---|
825 | WAVE/T sam_text=$"root:Packages:NIST:SAM:textread" |
---|
826 | |
---|
827 | WAVE drk_data=$"root:DRK:data" |
---|
828 | WAVE drk_reals=$"root:DRK:realsread" |
---|
829 | WAVE drk_ints=$"root:DRK:integersread" |
---|
830 | WAVE/T drk_text=$"root:DRK:textread" |
---|
831 | WAVE cor_data=$"root:Packages:NIST:COR:data" |
---|
832 | WAVE/T cor_text=$"root:Packages:NIST:COR:textread" |
---|
833 | |
---|
834 | //get sam and bgd attenuation factors |
---|
835 | String fileStr="" |
---|
836 | Variable lambda,attenNo,sam_AttenFactor,bgd_attenFactor |
---|
837 | Variable tmonsam,fsam,fbgd,xshift,yshift,rsam,csam,rbgd,cbgd,tmonbgd |
---|
838 | Variable wcen=0.001,time_drk,time_sam,savmon_sam,tsam |
---|
839 | fileStr = sam_text[3] |
---|
840 | lambda = sam_reals[26] |
---|
841 | attenNo = sam_reals[3] |
---|
842 | sam_AttenFactor = AttenuationFactor(fileStr,lambda,AttenNo) |
---|
843 | |
---|
844 | //get relative monitor counts (should all be 10^8, since normalized in add step) |
---|
845 | tmonsam = sam_reals[0] //monitor count in SAM |
---|
846 | tsam = sam_reals[4] //SAM transmission |
---|
847 | csam = sam_reals[16] //x center |
---|
848 | rsam = sam_reals[17] //beam (x,y) define center of corrected field |
---|
849 | |
---|
850 | savmon_sam=sam_reals[1] //true monitor count in SAM |
---|
851 | time_sam = sam_ints[2] //count time SAM |
---|
852 | time_drk = drk_ints[2] //drk count time |
---|
853 | |
---|
854 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
855 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
856 | //rescale drk to sam cnt time and then multiply by the same monitor scaling as SAM |
---|
857 | Make/D/O/N=(pixelsX,pixelsY) drk_temp |
---|
858 | drk_temp = drk_data*(time_sam/time_drk)*(tmonsam/savmon_sam) |
---|
859 | |
---|
860 | Make/D/O/N=(pixelsX,pixelsY) cor1 //temp arrays |
---|
861 | //always ignore the DRK center shift |
---|
862 | |
---|
863 | //do the subtraction, deposit result in cor1 |
---|
864 | fsam = 1 |
---|
865 | fbgd = tmonsam/tmonbgd //this should be ==1 since normalized files |
---|
866 | |
---|
867 | //correct sam for attenuators, and do the same to drk, since it was scaled to sam count time |
---|
868 | cor1 = fsam*sam_data/sam_AttenFactor - drk_temp/sam_attenFactor |
---|
869 | |
---|
870 | //we're done, get out w/no error |
---|
871 | //set the COR_data to the result |
---|
872 | cor_data = cor1 |
---|
873 | //update COR header |
---|
874 | cor_text[1] = date() + " " + time() //date + time stamp |
---|
875 | |
---|
876 | // KillWaves/Z cor1,bgd_temp,noadd_bgd,drk_temp |
---|
877 | SetDataFolder root: |
---|
878 | Return(0) |
---|
879 | End |
---|
880 | |
---|
881 | |
---|
882 | //function to return the shifted contents of a data array for subtraction |
---|
883 | //(SLOW) if ShiftSum is called |
---|
884 | //data_in is input |
---|
885 | //data_out is shifted matrix |
---|
886 | //noadd_mat =1 if shift matrix is valid, =0 if no data |
---|
887 | // |
---|
888 | //if no shift is required, data_in is returned and noadd_mat =1 (all valid) |
---|
889 | // |
---|
890 | Function GetShiftedArray(data_in,data_out,noadd_mat,xshift,yshift) |
---|
891 | WAVE data_in,data_out,noadd_mat |
---|
892 | Variable xshift,yshift |
---|
893 | |
---|
894 | Variable ii=0,jj=0 |
---|
895 | noadd_mat = 1 //initialize to 1 |
---|
896 | |
---|
897 | If((xshift != 0) || (yshift != 0)) |
---|
898 | // If((abs(xshift) >= 0.01) || (abs(yshift) >= 0.01)) //APR09 - loosen tolerance to handle ICE "precision" |
---|
899 | DoAlert 1,"Do you want to ignore the beam center mismatch?" |
---|
900 | if(V_flag==1) //yes -> just go on |
---|
901 | xshift=0 |
---|
902 | yshift=0 |
---|
903 | endif |
---|
904 | else |
---|
905 | // "mismatch" is simply a python type conversion error |
---|
906 | xshift=0 |
---|
907 | yshift=0 |
---|
908 | endif |
---|
909 | |
---|
910 | If((xshift == 0) && (yshift == 0)) |
---|
911 | data_out=data_in //no change |
---|
912 | noadd_mat = 1 //use all of the data |
---|
913 | return(0) |
---|
914 | endif |
---|
915 | |
---|
916 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
917 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
918 | |
---|
919 | Print "beamcenter shift x,y = ",xshift,yshift |
---|
920 | Make/O/N=1 noadd |
---|
921 | for(ii=0;ii<pixelsX;ii+=1) |
---|
922 | for(jj=0;jj<pixelsY;jj+=1) |
---|
923 | //get the contribution of the shifted data |
---|
924 | data_out[ii][jj] = ShiftSum(data_in,ii,jj,xshift,yshift,noadd) |
---|
925 | if(noadd[0]) |
---|
926 | noadd_mat[ii][jj] = 0 //shift is off the detector |
---|
927 | endif |
---|
928 | endfor |
---|
929 | endfor |
---|
930 | return(0) |
---|
931 | End |
---|
932 | |
---|
933 | //utility function that checks if data exists in a data folder |
---|
934 | //checks only for the existence of DATA - no other waves |
---|
935 | // |
---|
936 | Function WorkDataExists(type) |
---|
937 | String type |
---|
938 | |
---|
939 | String destPath="" |
---|
940 | destPath = "root:Packages:NIST:"+Type + ":data" |
---|
941 | if(WaveExists($destpath) == 0) |
---|
942 | Print "There is no work file in "+type |
---|
943 | Return(1) //error condition |
---|
944 | else |
---|
945 | //check for log-scaling of the data and adjust if necessary |
---|
946 | ConvertFolderToLinearScale(type) |
---|
947 | return(0) |
---|
948 | Endif |
---|
949 | End |
---|
950 | |
---|
951 | ////////////////// |
---|
952 | // bunch of utility junk to catch |
---|
953 | // sample transmission = 1 |
---|
954 | // and handle (too many) options |
---|
955 | // |
---|
956 | Function GetNewTrans(oldTrans,type) |
---|
957 | Variable oldTrans |
---|
958 | String type |
---|
959 | |
---|
960 | Variable newTrans,newCode |
---|
961 | if (oldTrans!=1) |
---|
962 | return(oldTrans) //get out now if trans != 1, don't change anything |
---|
963 | endif |
---|
964 | //get input from the user |
---|
965 | NewDataFolder/O root:myGlobals:tmp_trans |
---|
966 | Variable/G root:myGlobals:tmp_trans:inputTrans=0.92 |
---|
967 | Variable/G root:myGlobals:tmp_trans:returnCode=0 |
---|
968 | DoTransInput(type) |
---|
969 | NVAR inputTrans=root:myGlobals:tmp_trans:inputTrans |
---|
970 | NVAR code=root:myGlobals:tmp_trans:returnCode |
---|
971 | newTrans=inputTrans //keep a copy before deleting everything |
---|
972 | newCode=code |
---|
973 | if(newCode==4) |
---|
974 | Abort "Aborting correction. Use the Transmission Panel to calculate transmissions" |
---|
975 | Endif |
---|
976 | // printf "You entered %g and the code is %g\r",newTrans,newCode |
---|
977 | // KillDataFolder root:tmp_trans |
---|
978 | |
---|
979 | if(newCode==1) |
---|
980 | Variable/G root:Packages:NIST:gDoTransCheck=0 //turn off checking |
---|
981 | endif |
---|
982 | |
---|
983 | if(newcode==2) //user changed trans value |
---|
984 | return(newTrans) |
---|
985 | else |
---|
986 | return(oldTrans) //All other cases, user did not change value |
---|
987 | endif |
---|
988 | end |
---|
989 | |
---|
990 | Function IgnoreNowButton(ctrlName) : ButtonControl |
---|
991 | String ctrlName |
---|
992 | |
---|
993 | // Print "ignore now" |
---|
994 | NVAR val=root:myGlobals:tmp_trans:returnCode |
---|
995 | val=0 //code for ignore once |
---|
996 | |
---|
997 | DoWindow/K tmp_GetInputPanel // Kill self |
---|
998 | End |
---|
999 | |
---|
1000 | Function DoTransInput(str) |
---|
1001 | String str |
---|
1002 | |
---|
1003 | NewPanel /W=(150,50,361,294) |
---|
1004 | DoWindow/C tmp_GetInputPanel // Set to an unlikely name |
---|
1005 | DrawText 15,23,"The "+str+" Transmission = 1" |
---|
1006 | DrawText 15,43,"What do you want to do?" |
---|
1007 | DrawText 15,125,"(Reset this in Preferences)" |
---|
1008 | SetVariable setvar0,pos={20,170},size={160,17},limits={0,1,0.01} |
---|
1009 | SetVariable setvar0,value= root:myGlobals:tmp_trans:inputTrans,title="New Transmission" |
---|
1010 | |
---|
1011 | Button button0,pos={36,56},size={120,20},proc=IgnoreNowButton,title="Ignore This Time" |
---|
1012 | Button button1,pos={36,86},size={120,20},proc=IgnoreAlwaysButtonProc,title="Ignore Always" |
---|
1013 | Button button2,pos={36,143},size={120,20},proc=UseNewValueButtonProc,title="Use New Value" |
---|
1014 | Button button3,pos={36,213},size={120,20},proc=AbortCorrectionButtonProc,title="Abort Correction" |
---|
1015 | PauseForUser tmp_GetInputPanel |
---|
1016 | End |
---|
1017 | |
---|
1018 | Function IgnoreAlwaysButtonProc(ctrlName) : ButtonControl |
---|
1019 | String ctrlName |
---|
1020 | |
---|
1021 | // Print "ignore always" |
---|
1022 | NVAR val=root:myGlobals:tmp_trans:returnCode |
---|
1023 | val=1 //code for ignore always |
---|
1024 | DoWindow/K tmp_GetInputPanel // Kill self |
---|
1025 | End |
---|
1026 | |
---|
1027 | Function UseNewValueButtonProc(ctrlName) : ButtonControl |
---|
1028 | String ctrlName |
---|
1029 | |
---|
1030 | // Print "use new Value" |
---|
1031 | NVAR val=root:myGlobals:tmp_trans:returnCode |
---|
1032 | val=2 //code for use new Value |
---|
1033 | DoWindow/K tmp_GetInputPanel // Kill self |
---|
1034 | End |
---|
1035 | |
---|
1036 | Function AbortCorrectionButtonProc(ctrlName) : ButtonControl |
---|
1037 | String ctrlName |
---|
1038 | |
---|
1039 | // Print "Abort" |
---|
1040 | NVAR val=root:myGlobals:tmp_trans:returnCode |
---|
1041 | val=4 //code for abort |
---|
1042 | DoWindow/K tmp_GetInputPanel // Kill self |
---|
1043 | End |
---|
1044 | |
---|
1045 | ////////////////////////// |
---|
1046 | //**********unused*********** |
---|
1047 | //mode describes the type of subtraction that is to be done |
---|
1048 | //1 = both emp and bgd subtraction |
---|
1049 | //2 = only bgd subtraction |
---|
1050 | //3 = only emp subtraction |
---|
1051 | //4 = no subtraction (handled by ExecuteProtocol(), but implemented here as well) |
---|
1052 | // |
---|
1053 | // + 10 indicates that WORK.DRK is to be used |
---|
1054 | //**********unused*********** |
---|
1055 | //**worse yet, only partially converted to use DRK files!*********** |
---|
1056 | // |
---|
1057 | Function OLD_Correct(mode) |
---|
1058 | Variable mode |
---|
1059 | |
---|
1060 | //Print "mode = ",mode |
---|
1061 | if(mode==4) |
---|
1062 | Print "no subtraction required - Correct(mode) should not have been called" |
---|
1063 | return(1) //error - correct should not have been called |
---|
1064 | Endif |
---|
1065 | |
---|
1066 | // always check for existence of data in SAM |
---|
1067 | // if the desired workfile doesn't exist, let the user know, and abort |
---|
1068 | String destPath |
---|
1069 | String type = "SAM" |
---|
1070 | //check for SAM |
---|
1071 | destPath = "root:Packages:NIST:"+Type + ":data" |
---|
1072 | if(WaveExists($destpath) == 0) |
---|
1073 | Print "There is no work file in "+type+"--Aborting" |
---|
1074 | Return(1) //error condition |
---|
1075 | else |
---|
1076 | //check for log-scaling of the "SAM" data and adjust if necessary |
---|
1077 | ConvertFolderToLinearScale(type) |
---|
1078 | Wave sam_data = $"root:Packages:NIST:SAM:data" |
---|
1079 | Endif |
---|
1080 | |
---|
1081 | //check for BGD if mode = 1 or 2 or 11 or 12 |
---|
1082 | if( (mode ==1) || (mode==2) || (mode==11) || (mode==12) ) |
---|
1083 | type = "BGD" |
---|
1084 | destPath = "root:Packages:NIST:"+Type + ":data" |
---|
1085 | if(WaveExists($destpath) == 0) |
---|
1086 | Print "There is no work file in "+type+"--Aborting" |
---|
1087 | Return(1) //error condition |
---|
1088 | else |
---|
1089 | //check for log-scaling of the "BGD" data and adjust if necessary |
---|
1090 | ConvertFolderToLinearScale(type) |
---|
1091 | Wave bgd_data = $"root:Packages:NIST:BGD:data" |
---|
1092 | Endif |
---|
1093 | Endif |
---|
1094 | |
---|
1095 | // check for EMP data if type 3 or 1 or 13 or 11 |
---|
1096 | if( (mode==1) || (mode==3) || (mode==11) || (mode==13) ) |
---|
1097 | type = "EMP" |
---|
1098 | destPath = "root:Packages:NIST:"+Type + ":data" |
---|
1099 | if(WaveExists($destpath) == 0) |
---|
1100 | Print "There is no work file in "+type+"--Aborting" |
---|
1101 | Return(1) //error condition |
---|
1102 | else |
---|
1103 | //check for log-scaling of the "EMP" data and adjust if necessary |
---|
1104 | ConvertFolderToLinearScale(type) |
---|
1105 | Wave emp_data = $"root:Packages:NIST:EMP:data" |
---|
1106 | Endif |
---|
1107 | Endif |
---|
1108 | |
---|
1109 | // check for DRK data if type 11,12,13, or 14 |
---|
1110 | if( (mode==11) || (mode==12) || (mode==13) || (mode==14) ) |
---|
1111 | type = "DRK" |
---|
1112 | destPath = "root:Packages:NIST:"+Type + ":data" |
---|
1113 | if(WaveExists($destpath) == 0) |
---|
1114 | Print "There is no work file in "+type+"--Aborting" |
---|
1115 | Return(1) //error condition |
---|
1116 | else |
---|
1117 | //check for log-scaling of the "EMP" data and adjust if necessary |
---|
1118 | ConvertFolderToLinearScale(type) |
---|
1119 | Wave drk_data = $"root:DRK:data" |
---|
1120 | Endif |
---|
1121 | Endif |
---|
1122 | |
---|
1123 | //necessary files exist, proceed |
---|
1124 | |
---|
1125 | //make needed wave references to other folders |
---|
1126 | //NOTE that these references MAY NOT EXIST, depending on the mode |
---|
1127 | WAVE sam_reals = $"root:Packages:NIST:SAM:realsread" |
---|
1128 | WAVE sam_ints = $"root:Packages:NIST:SAM:integersread" |
---|
1129 | WAVE/T sam_text = $"root:Packages:NIST:SAM:textread" |
---|
1130 | WAVE/Z emp_reals = $"root:Packages:NIST:EMP:realsread" |
---|
1131 | WAVE/Z emp_ints = $"root:Packages:NIST:EMP:integersread" |
---|
1132 | WAVE/T/Z emp_text = $"root:Packages:NIST:EMP:textread" |
---|
1133 | WAVE/Z bgd_reals = $"root:Packages:NIST:BGD:realsread" |
---|
1134 | WAVE/Z bgd_ints = $"root:Packages:NIST:BGD:integersread" |
---|
1135 | WAVE/T/Z bgd_text = $"root:Packages:NIST:BGD:textread" |
---|
1136 | |
---|
1137 | //find the attenuation of the sample (if any) |
---|
1138 | Variable SamAttenFactor,lambda,attenNo,err=0 |
---|
1139 | String samfileStr="" |
---|
1140 | samfileStr = sam_text[3] |
---|
1141 | lambda = sam_reals[26] |
---|
1142 | attenNo = sam_reals[3] |
---|
1143 | SamAttenFactor = AttenuationFactor(samFileStr,lambda,AttenNo) |
---|
1144 | //if sample trans is zero, do only SAM-BGD subtraction (notify the user) |
---|
1145 | Variable sam_trans = sam_reals[4] |
---|
1146 | |
---|
1147 | //copy SAM information to COR, wiping out the old contents of the COR folder first |
---|
1148 | err = CopyWorkContents("SAM","COR") |
---|
1149 | if(err==1) |
---|
1150 | Abort "No data in SAM, abort from Correct()" |
---|
1151 | endif |
---|
1152 | |
---|
1153 | //now switch to COR folder |
---|
1154 | DestPath="root:Packages:NIST:COR" |
---|
1155 | //make appropriate wave references |
---|
1156 | WAVE data=$(destPath + ":data") // these wave references point to the SAM data in COR |
---|
1157 | WAVE/T textread=$(destPath + ":textread") //that are to be directly operated on |
---|
1158 | WAVE integersread=$(destPath + ":integersread") |
---|
1159 | WAVE realsread=$(destPath + ":realsRead") |
---|
1160 | |
---|
1161 | NVAR pixelsX = root:myGlobals:gNPixelsX |
---|
1162 | NVAR pixelsY = root:myGlobals:gNPixelsY |
---|
1163 | |
---|
1164 | //Print "done copying data, starting the correct calculations" |
---|
1165 | |
---|
1166 | // Start the actual "correct" step here |
---|
1167 | Variable wcen=0.001,numsam,tmonsam,tsam,rsam,csam,fsam |
---|
1168 | Variable tmonbgd,fbgd,xshift,yshift,rbgd,cbgd,sh_sum,ii,jj,trans,tmonemp,temp,femp |
---|
1169 | Variable cemp,remp |
---|
1170 | //make temporary waves to hold the intermediate results and the shifted arrays |
---|
1171 | Duplicate/O data cor1,cor2 |
---|
1172 | cor1 = 0 //initialize to zero |
---|
1173 | cor2 = 0 |
---|
1174 | |
---|
1175 | //make needed wave references to other folders |
---|
1176 | Wave sam_reals = $"root:Packages:NIST:SAM:realsread" |
---|
1177 | Wave bgd_reals = $"root:Packages:NIST:BGD:realsread" |
---|
1178 | Wave emp_reals = $"root:Packages:NIST:EMP:realsread" |
---|
1179 | |
---|
1180 | //get counts, trans, etc. from file headers |
---|
1181 | numsam = sam_ints[3] //number of runs in SAM file |
---|
1182 | tmonsam = sam_reals[0] //monitor count in SAM |
---|
1183 | tsam = sam_reals[4] //SAM transmission |
---|
1184 | csam = sam_reals[16] //x center |
---|
1185 | rsam = sam_reals[17] //beam (x,y) define center of corrected field |
---|
1186 | //Print "rsam,csam = ",rsam,csam |
---|
1187 | |
---|
1188 | // |
---|
1189 | //do sam-bgd subtraction if mode (1) or (2) |
---|
1190 | //else (mode 3), set cor1 = sam_data |
---|
1191 | if( (mode==1) || (mode==2) ) |
---|
1192 | fsam = 1 |
---|
1193 | tmonbgd = bgd_reals[0] //monitor count in BGD |
---|
1194 | fbgd = tmonsam/tmonbgd //this should be ==1 since normalized files |
---|
1195 | |
---|
1196 | //set up center shift, relative to SAM |
---|
1197 | cbgd = bgd_reals[16] |
---|
1198 | rbgd = bgd_reals[17] |
---|
1199 | //Print "rbgd,cbgd = ",rbgd,cbgd |
---|
1200 | xshift = cbgd-csam |
---|
1201 | yshift = rbgd-rsam |
---|
1202 | if(abs(xshift) <= wcen) |
---|
1203 | xshift = 0 |
---|
1204 | Endif |
---|
1205 | if(abs(yshift) <= wcen) |
---|
1206 | yshift = 0 |
---|
1207 | Endif |
---|
1208 | |
---|
1209 | If((xshift != 0) || (yshift != 0)) |
---|
1210 | DoAlert 1,"Do you want to ignore the beam center mismatch?" |
---|
1211 | if(V_flag==1) //yes -> just go on |
---|
1212 | xshift=0 |
---|
1213 | yshift=0 |
---|
1214 | endif |
---|
1215 | endif |
---|
1216 | //do the sam-bgd subtraction, deposit result in cor1[][] |
---|
1217 | If((xshift == 0) && (yshift == 0)) |
---|
1218 | //great, no shift required |
---|
1219 | cor1 = fsam*sam_data - fbgd*bgd_data*SamAttenFactor |
---|
1220 | else |
---|
1221 | //shift required, very time-consuming |
---|
1222 | Print "sam-bgd shift x,y = ",xshift,yshift |
---|
1223 | Make/O/N=1 noadd //needed to get noadd condition back from ShiftSum() |
---|
1224 | ii=0 |
---|
1225 | do |
---|
1226 | jj=0 |
---|
1227 | do |
---|
1228 | //get the contribution of shifted data |
---|
1229 | sh_sum = ShiftSum(bgd_data,ii,jj,xshift,yshift,noadd) |
---|
1230 | if(noadd[0]) |
---|
1231 | cor1[ii][jj]=0 |
---|
1232 | else |
---|
1233 | //add the sam_data + shifted sum |
---|
1234 | cor1[ii][jj] = fsam*sam_data[ii][jj] - fbgd*sh_sum*SamAttenFactor |
---|
1235 | Endif |
---|
1236 | jj+=1 |
---|
1237 | while(jj<pixelsY) |
---|
1238 | ii+=1 |
---|
1239 | while(ii<pixelsX) |
---|
1240 | Endif |
---|
1241 | else //switch on mode |
---|
1242 | cor1 = sam_data //setup for just EMP subtraction |
---|
1243 | Endif |
---|
1244 | |
---|
1245 | //Print "sam-bgd done" |
---|
1246 | |
---|
1247 | if(mode == 2) //just a BGD subtraction |
---|
1248 | //we're done, get out w/no error |
---|
1249 | //set the COR data to the result |
---|
1250 | data = cor1 |
---|
1251 | //update COR header |
---|
1252 | textread[1] = date() + " " + time() //date + time stamp |
---|
1253 | SetDataFolder root: |
---|
1254 | KillWaves/Z cor1,cor2 |
---|
1255 | Return(0) |
---|
1256 | Endif |
---|
1257 | |
---|
1258 | //if mode ==1 (ONLY choice left) do the empty-background subtraction |
---|
1259 | //else mode = 3, set cor2 to emp_data |
---|
1260 | if(mode==1) //full subtraction |
---|
1261 | trans = emp_reals[4] //EMP transmission |
---|
1262 | if(trans == 0) |
---|
1263 | trans = 1 |
---|
1264 | DoAlert 0,"Empty cell transmission was zero. It has been reset to one for the calculation" |
---|
1265 | endif |
---|
1266 | tmonemp = emp_reals[0] |
---|
1267 | femp = tmonsam/tmonemp |
---|
1268 | temp = trans |
---|
1269 | |
---|
1270 | //set up center shift, relative to EMP |
---|
1271 | cemp = emp_reals[16] |
---|
1272 | remp = emp_reals[17] |
---|
1273 | //Print "remp,cemp ",remp,cemp |
---|
1274 | xshift = cbgd - cemp |
---|
1275 | yshift = rbgd - remp |
---|
1276 | if(abs(xshift) <= wcen ) |
---|
1277 | xshift = 0 |
---|
1278 | endif |
---|
1279 | if(abs(yshift) <= wcen) |
---|
1280 | yshift = 0 |
---|
1281 | endif |
---|
1282 | |
---|
1283 | If((xshift != 0) || (yshift != 0)) |
---|
1284 | DoAlert 1,"Do you want to ignore the beam center mismatch?" |
---|
1285 | if(V_flag==1) |
---|
1286 | xshift=0 |
---|
1287 | yshift=0 |
---|
1288 | endif |
---|
1289 | endif |
---|
1290 | //do the emp-bgd subtraction, deposit result in cor2[][] |
---|
1291 | If((xshift == 0) && (yshift == 0)) |
---|
1292 | //great, no shift required, DON'T scale this by the attenuation gfactor |
---|
1293 | cor2 = femp*emp_data - fbgd*bgd_data |
---|
1294 | else |
---|
1295 | //shift required, very time-consuming |
---|
1296 | Print "emp-bgd shift x,y = ",xshift,yshift |
---|
1297 | Make/O/N=1 noadd //needed to get noadd condition back from ShiftSum() |
---|
1298 | ii=0 |
---|
1299 | do |
---|
1300 | jj=0 |
---|
1301 | do |
---|
1302 | //get the contribution of shifted data |
---|
1303 | sh_sum = ShiftSum(bgd_data,ii,jj,xshift,yshift,noadd) |
---|
1304 | if(noadd[0]) |
---|
1305 | cor2[ii][jj]=0 |
---|
1306 | else |
---|
1307 | //add the sam_data + shifted sum |
---|
1308 | cor2[ii][jj] = femp*emp_data[ii][jj] - fbgd*sh_sum |
---|
1309 | Endif |
---|
1310 | jj+=1 |
---|
1311 | while(jj<pixelsY) |
---|
1312 | ii+=1 |
---|
1313 | while(ii<pixelsX) |
---|
1314 | Endif |
---|
1315 | else //switch on mode==1 for full subtraction |
---|
1316 | cor2 = emp_data |
---|
1317 | //be sure to set the empty center location... for the shift |
---|
1318 | trans = emp_reals[4] //EMP transmission |
---|
1319 | if(trans == 0) |
---|
1320 | trans = 1 |
---|
1321 | DoAlert 0,"Empty cell transmission was zero. It has been reset to one for the calculation" |
---|
1322 | endif |
---|
1323 | tmonemp = emp_reals[0] |
---|
1324 | femp = tmonsam/tmonemp |
---|
1325 | temp = trans |
---|
1326 | |
---|
1327 | //set up center shift, relative to EMP |
---|
1328 | cemp = emp_reals[16] |
---|
1329 | remp = emp_reals[17] |
---|
1330 | Endif |
---|
1331 | |
---|
1332 | //Print "emp-bgd done" |
---|
1333 | |
---|
1334 | //mode 2 exited, either 1 or 3 apply from here, and are setup properly. |
---|
1335 | |
---|
1336 | //set up for final step, data(COR) = cor1 - Tsam/Temp*cor2 |
---|
1337 | //set up shift, relative to SAM |
---|
1338 | xshift = cemp - csam |
---|
1339 | yshift = remp - rsam |
---|
1340 | if(abs(xshift) <= wcen ) |
---|
1341 | xshift = 0 |
---|
1342 | endif |
---|
1343 | if(abs(yshift) <= wcen) |
---|
1344 | yshift = 0 |
---|
1345 | endif |
---|
1346 | |
---|
1347 | If((xshift != 0) || (yshift != 0)) |
---|
1348 | DoAlert 1,"Do you want to ignore the beam center mismatch?" |
---|
1349 | if(V_flag==1) |
---|
1350 | xshift=0 |
---|
1351 | yshift=0 |
---|
1352 | endif |
---|
1353 | endif |
---|
1354 | //do the cor1-a*cor2 subtraction, deposit result in data[][] (in the COR folder) |
---|
1355 | If((xshift == 0) && (yshift == 0)) |
---|
1356 | //great, no shift required |
---|
1357 | data = cor1 - (tsam/temp)*cor2*SamAttenFactor |
---|
1358 | else |
---|
1359 | //shift required, very time-consuming |
---|
1360 | Print "sam-emp shift x,y = ",xshift,yshift |
---|
1361 | Make/O/N=1 noadd //needed to get noadd condition back from ShiftSum() |
---|
1362 | ii=0 |
---|
1363 | do |
---|
1364 | jj=0 |
---|
1365 | do |
---|
1366 | //get the contribution of shifted data |
---|
1367 | sh_sum = ShiftSum(cor2,ii,jj,xshift,yshift,noadd) |
---|
1368 | if(noadd[0]) |
---|
1369 | data[ii][jj]=0 |
---|
1370 | else |
---|
1371 | //add the sam_data + shifted sum |
---|
1372 | data[ii][jj] = cor1[ii][jj] - (tsam/temp)*sh_sum*SamAttenFactor |
---|
1373 | Endif |
---|
1374 | jj+=1 |
---|
1375 | while(jj<pixelsY) |
---|
1376 | ii+=1 |
---|
1377 | while(ii<pixelsX) |
---|
1378 | Endif |
---|
1379 | |
---|
1380 | //Print "all done" |
---|
1381 | |
---|
1382 | //update COR header |
---|
1383 | textread[1] = date() + " " + time() //date + time stamp |
---|
1384 | |
---|
1385 | //clean up |
---|
1386 | SetDataFolder root:Packages:NIST:COR |
---|
1387 | SetDataFolder root: |
---|
1388 | KillWaves/Z cor1,cor2,noadd |
---|
1389 | |
---|
1390 | Return(0) //all is ok, if you made it to this point |
---|
1391 | End |
---|