source: sans/Dev/trunk/NCNR_User_Procedures/SANS/Reduction/WriteQIS.ipf @ 401

Last change on this file since 401 was 401, checked in by ajj, 14 years ago

Fixed bug in GRASP export.

If the result was that the last line of the file would contain only 1 value, then it wasn't written. Array index vs point number issue.

File size: 24.5 KB
Line 
1#pragma rtGlobals=1             // Use modern global access method.
2#pragma version=5.0
3#pragma IgorVersion=6.0
4
5//************************
6// Vers 1.2 091001
7//
8//************************
9
10//for writing out data (q-i-s) from the "type" folder, and including reduction information
11//if fullpath is a complete HD path:filename, no dialog will be presented
12//if fullpath is just a filename, the save dialog will be presented
13//if dialog = 1, a dialog will always be presented
14//
15// root:myGlobals:Protocols:gProtoStr is the name of the currently active protocol
16//
17Function WriteWaves_W_Protocol(type,fullpath,dialog)
18        String type,fullpath
19        Variable dialog         //=1 will present dialog for name
20       
21        String destStr=""
22        destStr = "root:"+type
23       
24        Variable refNum
25        String formatStr = "%15.4g %15.4g %15.4g %15.4g %15.4g %15.4g\r\n"
26        String fname,ave="C",hdrStr1="",hdrStr2=""
27        Variable step=1
28       
29       
30       
31        //*****these waves MUST EXIST, or IGOR Pro will crash, with a type 2 error****
32        WAVE intw=$(destStr + ":integersRead")
33        WAVE rw=$(destStr + ":realsRead")
34        WAVE/T textw=$(destStr + ":textRead")
35        WAVE qvals =$(destStr + ":qval")
36        WAVE inten=$(destStr + ":aveint")
37        WAVE sig=$(destStr + ":sigave")
38        WAVE qbar = $(destStr + ":QBar")
39        WAVE sigmaq = $(destStr + ":SigmaQ")
40        WAVE fsubs = $(destStr + ":fSubS")
41
42        SVAR gProtoStr = root:myGlobals:Protocols:gProtoStr
43        Wave/T proto=$("root:myGlobals:Protocols:"+gProtoStr)
44       
45        //check each wave
46        If(!(WaveExists(intw)))
47                Abort "intw DNExist BinaryWrite_W_Protocol()"
48        Endif
49        If(!(WaveExists(rw)))
50                Abort "rw DNExist BinaryWrite_W_Protocol()"
51        Endif
52        If(!(WaveExists(textw)))
53                Abort "textw DNExist BinaryWrite_W_Protocol()"
54        Endif
55        If(!(WaveExists(qvals)))
56                Abort "qvals DNExist BinaryWrite_W_Protocol()"
57        Endif
58        If(!(WaveExists(inten)))
59                Abort "inten DNExist BinaryWrite_W_Protocol()"
60        Endif
61        If(!(WaveExists(sig)))
62                Abort "sig DNExist BinaryWrite_W_Protocol()"
63        Endif
64        If(!(WaveExists(qbar)))
65                Abort "qbar DNExist BinaryWrite_W_Protocol()"
66        Endif
67        If(!(WaveExists(sigmaq)))
68                Abort "sigmaq DNExist BinaryWrite_W_Protocol()"
69        Endif
70        If(!(WaveExists(fsubs)))
71                Abort "fsubs DNExist BinaryWrite_W_Protocol()"
72        Endif
73        If(!(WaveExists(proto)))
74                Abort "current protocol wave DNExist BinaryWrite_W_Protocol()"
75        Endif
76
77        //strings can be too long to print-- must trim to 255 chars
78        Variable ii,num=8
79        Make/O/T/N=(num) tempShortProto
80        for(ii=0;ii<num;ii+=1)
81                tempShortProto[ii] = (proto[ii])[0,240]
82        endfor
83       
84        if(dialog)
85                PathInfo/S catPathName
86                fullPath = DoSaveFileDialog("Save data as")
87                If(cmpstr(fullPath,"")==0)
88                        //user cancel, don't write out a file
89                        Close/A
90                        Abort "no data file was written"
91                Endif
92                //Print "dialog fullpath = ",fullpath
93        Endif
94       
95        hdrStr1 = num2str(rw[0])+"  "+num2str(rw[26])+"       "+num2str(rw[19])+"     "+num2str(rw[18])
96        hdrStr1 += "     "+num2str(rw[4])+"     "+num2str(rw[5]) + ave +"   "+num2str(step) + "\r\n"
97
98        hdrStr2 = num2str(rw[16])+"  "+num2str(rw[17])+"  "+num2str(rw[23])+"    "+num2str(rw[24])+"    "
99        hdrStr2 += num2str(rw[25])+"    "+num2str(rw[27])+"    "+num2str(rw[21])+"    "+textW[9] + "\r\n"
100       
101        SVAR samFiles = $("root:"+type+":fileList")
102        //actually open the file here
103        Open refNum as fullpath
104       
105        //write out the standard header information
106        fprintf refnum,"FILE: %s\t\t CREATED: %s\r\n",textw[0],textw[1]
107        fprintf refnum,"LABEL: %s\r\n",textw[6]
108        fprintf refnum,"MON CNT   LAMBDA   DET ANG   DET DIST   TRANS   THICK   AVE   STEP\r\n"
109        fprintf refnum,hdrStr1
110        fprintf refnum,"BCENT(X,Y)   A1(mm)   A2(mm)   A1A2DIST(m)   DL/L   BSTOP(mm)   DET_TYP \r\n"
111        fprintf refnum,hdrStr2
112//      fprintf refnum,headerFormat,rw[0],rw[26],rw[19],rw[18],rw[4],rw[5],ave,step
113
114        //insert protocol information here
115        //-1 list of sample files
116        //0 - bkg
117        //1 - emp
118        //2 - div
119        //3 - mask
120        //4 - abs params c2-c5
121        //5 - average params
122        fprintf refnum, "SAM: %s\r\n",samFiles
123        fprintf refnum, "BGD: %s\r\n",tempShortProto[0]
124        fprintf refnum, "EMP: %s\r\n",tempShortProto[1]
125        fprintf refnum, "DIV: %s\r\n",tempShortProto[2]
126        fprintf refnum, "MASK: %s\r\n",tempShortProto[3]
127        fprintf refnum, "ABS Parameters (3-6): %s\r\n",tempShortProto[4]
128        fprintf refnum, "Average Choices: %s\r\n",tempShortProto[5]
129       
130        //write out the data columns
131        fprintf refnum,"The 6 columns are | Q (1/A) | I(Q) (1/cm) | std. dev. I(Q) (1/cm) | sigmaQ | meanQ | ShadowFactor|\r\n"
132        wfprintf refnum, formatStr, qvals,inten,sig,sigmaq,qbar,fsubs
133       
134        Close refnum
135       
136        SetDataFolder root:             //(redundant)
137       
138        //write confirmation of write operation to history area
139        Print "Averaged File written: ", GetFileNameFromPathNoSemi(fullPath)
140        KillWaves/Z tempShortProto
141        Return(0)
142End
143
144
145//for writing out data (phi-i-s) from the "type" folder, and including reduction information
146//if fullpath is a complete HD path:filename, no dialog will be presented
147//if fullpath is just a filename, the save dialog will be presented
148//if dialog = 1, a dialog will always be presented
149//
150// root:myGlobals:Protocols:gProtoStr is the name of the currently active protocol
151//
152Function WritePhiave_W_Protocol(type,fullpath,dialog)
153        String type,fullpath
154        Variable dialog         //=1 will present dialog for name
155       
156        String destStr
157        destStr = "root:"+type
158       
159        Variable refNum
160        String formatStr = "%15.4g %15.4g %15.4g\r\n"
161        String fname,ave="C",hdrStr1,hdrStr2
162        Variable step=1
163       
164        //*****these waves MUST EXIST, or IGOR Pro will crash, with a type 2 error****
165        WAVE intw=$(destStr + ":integersRead")
166        WAVE rw=$(destStr + ":realsRead")
167        WAVE/T textw=$(destStr + ":textRead")
168        WAVE phival =$(destStr + ":phival")
169        WAVE inten=$(destStr + ":aveint")
170        WAVE sig=$(destStr + ":sigave")
171        SVAR gProtoStr = root:myGlobals:Protocols:gProtoStr
172        Wave/T proto=$("root:myGlobals:Protocols:"+gProtoStr)
173       
174        //check each wave
175        If(!(WaveExists(intw)))
176                Abort "intw DNExist BinaryWrite_W_Protocol()"
177        Endif
178        If(!(WaveExists(rw)))
179                Abort "rw DNExist BinaryWrite_W_Protocol()"
180        Endif
181        If(!(WaveExists(textw)))
182                Abort "textw DNExist BinaryWrite_W_Protocol()"
183        Endif
184        If(!(WaveExists(phival)))
185                Abort "qvals DNExist BinaryWrite_W_Protocol()"
186        Endif
187        If(!(WaveExists(inten)))
188                Abort "inten DNExist BinaryWrite_W_Protocol()"
189        Endif
190        If(!(WaveExists(sig)))
191                Abort "sig DNExist BinaryWrite_W_Protocol()"
192        Endif
193        If(!(WaveExists(proto)))
194                Abort "current protocol wave DNExist BinaryWrite_W_Protocol()"
195        Endif
196        //strings can be too long to print-- must trim to 255 chars
197        Variable ii,num=8
198        Make/O/T/N=(num) tempShortProto
199        for(ii=0;ii<num;ii+=1)
200                tempShortProto[ii] = (proto[ii])[0,240]
201        endfor
202       
203        if(dialog)
204                PathInfo/S catPathName
205                fullPath = DoSaveFileDialog("Save data as")
206                If(cmpstr(fullPath,"")==0)
207                        //user cancel, don't write out a file
208                        Close/A
209                        Abort "no data file was written"
210                Endif
211                //Print "dialog fullpath = ",fullpath
212        Endif
213       
214        hdrStr1 = num2str(rw[0])+"  "+num2str(rw[26])+"       "+num2str(rw[19])+"     "+num2str(rw[18])
215        hdrStr1 += "     "+num2str(rw[4])+"     "+num2str(rw[5]) + ave +"   "+num2str(step) + "\r\n"
216
217        hdrStr2 = num2str(rw[16])+"  "+num2str(rw[17])+"  "+num2str(rw[23])+"    "+num2str(rw[24])+"    "
218        hdrStr2 += num2str(rw[25])+"    "+num2str(rw[27])+"    "+num2str(rw[21])+"    "+textW[9] + "\r\n"
219       
220        SVAR samFiles = $("root:"+type+":fileList")
221        //actually open the file here
222        Open refNum as fullpath
223       
224        //write out the standard header information
225        fprintf refnum,"FILE: %s\t\t CREATED: %s\r\n",textw[0],textw[1]
226        fprintf refnum,"LABEL: %s\r\n",textw[6]
227        fprintf refnum,"MON CNT   LAMBDA   DET ANG   DET DIST   TRANS   THICK   AVE   STEP\r\n"
228        fprintf refnum,hdrStr1
229        fprintf refnum,"BCENT(X,Y)   A1(mm)   A2(mm)   A1A2DIST(m)   DL/L   BSTOP(mm)   DET_TYP \r\n"
230        fprintf refnum,hdrStr2
231       
232        //insert protocol information here
233        //0 - bkg
234        //1 - emp
235        //2 - div
236        //3 - mask
237        //4 - abs params c2-c5
238        //5 - average params
239        fprintf refnum, "SAM: %s\r\n",samFiles
240        fprintf refnum, "BGD: %s\r\n",tempShortProto[0]
241        fprintf refnum, "EMP: %s\r\n",tempShortProto[1]
242        fprintf refnum, "DIV: %s\r\n",tempShortProto[2]
243        fprintf refnum, "MASK: %s\r\n",tempShortProto[3]
244        fprintf refnum, "ABS Parameters (3-6): %s\r\n",tempShortProto[4]
245        fprintf refnum, "Average Choices: %s\r\n",tempShortProto[5]
246       
247        //write out the data columns
248        fprintf refnum,"The 3 columns are | Phi (deg) | I(phi) (1/cm) | std. dev. I(phi) (1/cm) |\r\n"
249        wfprintf refnum, formatStr, phival,inten,sig
250       
251        Close refnum
252       
253        SetDataFolder root:             //(redundant)
254       
255        //write confirmation of write operation to history area
256        Print "Averaged File written: ", GetFileNameFromPathNoSemi(fullPath)
257        KillWaves/Z tempShortProto
258
259        Return(0)
260End
261
262//*****************
263// saves the data after all of the desired reduction steps (average options)
264// as a 2x expanded PNG file (approx 33kb)
265//
266Function SaveAsPNG(type,fullPath,dialog)
267        String type,fullPath
268        Variable dialog
269       
270        Variable refnum
271        if(dialog)
272                PathInfo/S catPathName
273                fullPath = DoSaveFileDialog("Save data as")             //won't actually open the file
274                If(cmpstr(fullPath,"")==0)
275                        //user cancel, don't write out a file
276                        Close/A
277                        Abort "no data file was written"
278                Endif
279                //Print "dialog fullpath = ",fullpath
280        Endif
281       
282        //cleanup the filename passed in from Protocol...
283        String oldStr="",newStr="",pathStr=""
284        oldStr=GetFileNameFromPathNoSemi(fullPath)      //just the filename
285        pathStr=GetPathStrFromfullName(fullPath)        //just the path
286       
287        newStr = CleanupName(oldStr, 0 )                                //filename with _EXT rather than .EXT
288        fullPath=pathStr+newStr+".png"                          //tack on the png extension
289       
290        print "type=",type
291        //graph the current data and save a little graph
292        Wave data =  $("root:"+type+":data")
293        Wave q_x_axis = $"root:myGlobals:q_x_axis"
294        Wave q_y_axis = $"root:myGlobals:q_y_axis"
295        Wave NIHColors = $"root:myGlobals:NIHColors"
296       
297        NewImage/F data
298        DoWindow/C temp_PNG
299        ModifyImage data cindex= NIHColors
300        AppendToGraph/R q_y_axis
301        ModifyGraph tkLblRot(right)=90,lowTrip(right)=0.001
302        AppendToGraph/T q_x_axis
303        ModifyGraph lowTrip(top)=0.001,standoff=0,mode=2
304        ModifyGraph fSize(right)=9,fSize(top)=9,btLen=3
305       
306//      ModifyGraph nticks=0
307       
308//      WaveStats/Q data
309//      ScaleColorsToData(V_min, V_max, NIHColors)
310
311// ***comment out for DEMO_MODIFIED version
312        SavePict/Z/E=-5/B=144 as fullPath                       //PNG at 2x screen resolution
313//***
314
315        Print "Saved graphic as ",newStr+".png"
316        DoWindow/K temp_PNG
317End
318
319//****************
320//Testing only , not called
321Proc Fast_ASCII_2D_Export(type,term)
322        String type,term
323        Prompt type,"2-D data type for Export",popup,"SAM;EMP;BGD;DIV;COR;CAL;RAW;ABS;MSK;"
324        Prompt term,"line termination",popup,"CR;LF;CRLF;"
325       
326        //terminator is currently ignored
327        Fast2dExport(type,"",1)
328       
329End
330
331//the default termination for the platform is used...
332//if RAW export, sets "dummy" protocol to "RAW data export"
333Function Fast2dExport(type,fullpath,dialog)
334        String type,fullpath
335        Variable dialog         //=1 will present dialog for name
336               
337        String destStr="",ave="C",typeStr=""
338        Variable step=1,refnum
339        destStr = "root:"+type
340       
341        //must select the linear_data to export
342        // can't export log data if there are -ve intensities from a subtraction
343        NVAR isLog = $(destStr+":gIsLogScale")
344        if(isLog==1)
345                typeStr = ":linear_data"
346        else
347                typeStr = ":data"
348        endif
349       
350        NVAR pixelsX = root:myGlobals:gNPixelsX
351        NVAR pixelsY = root:myGlobals:gNPixelsY
352       
353        Wave data=$(destStr+typeStr)
354        WAVE intw=$(destStr + ":integersRead")
355        WAVE rw=$(destStr + ":realsRead")
356        WAVE/T textw=$(destStr + ":textRead")
357
358        SVAR gProtoStr = root:myGlobals:Protocols:gProtoStr
359        String rawTag=""
360        if(cmpstr(type,"RAW")==0)
361                Make/O/T/N=8 proto={"none","none","none","none","none","none","none","none"}
362                RawTag = "RAW Data File: "     
363        else
364                Wave/T proto=$("root:myGlobals:Protocols:"+gProtoStr)
365        endif
366        SVAR samFiles = $("root:"+type+":fileList")
367        //check each wave - MUST exist, or will cause a crash
368        If(!(WaveExists(data)))
369                Abort "data DNExist AsciiExport()"
370        Endif
371        If(!(WaveExists(intw)))
372                Abort "intw DNExist AsciiExport()"
373        Endif
374        If(!(WaveExists(rw)))
375                Abort "rw DNExist AsciiExport()"
376        Endif
377        If(!(WaveExists(textw)))
378                Abort "textw DNExist AsciiExport()"
379        Endif
380        If(!(WaveExists(proto)))
381                Abort "current protocol wave DNExist AsciiExport()"
382        Endif
383       
384        if(dialog)
385                PathInfo/S catPathName
386                fullPath = DoSaveFileDialog("Save data as")
387                If(cmpstr(fullPath,"")==0)
388                        //user cancel, don't write out a file
389                        Close/A
390                        Abort "no data file was written"
391                Endif
392                //Print "dialog fullpath = ",fullpath
393        Endif
394       
395/////////
396        Variable numTextLines=18
397        Make/O/T/N=(numTextLines) labelWave
398        labelWave[0] = "FILE: "+textw[0]+"   CREATED: "+textw[1]
399        labelWave[1] = "LABEL: "+textw[6]
400        labelWave[2] = "MON CNT   LAMBDA(A)   DET_OFF(cm)   DET_DIST(m)   TRANS   THICK(cm)"
401        labelWave[3] = num2str(rw[0])+"  "+num2str(rw[26])+"       "+num2str(rw[19])+"     "+num2str(rw[18])
402        labelWave[3] += "     "+num2str(rw[4])+"     "+num2str(rw[5])
403        labelWave[4] = "BCENT(X,Y)   A1(mm)   A2(mm)   A1A2DIST(m)   DL/L   BSTOP(mm)   DET_TYP  "
404        labelWave[5] = num2str(rw[16])+"  "+num2str(rw[17])+"  "+num2str(rw[23])+"  "+num2str(rw[24])+"  "
405        labelWave[5] += num2str(rw[25])+"  "+num2str(rw[27])+"  "+num2str(rw[21])+"  "+textW[9]
406        labelWave[6] =  "SAM: "+rawTag+samFiles
407        labelWave[7] =  "BGD: "+proto[0]
408        labelWave[8] =  "EMP: "+proto[1]
409        labelWave[9] =  "DIV: "+proto[2]
410        labelWave[10] =  "MASK: "+proto[3]
411        labelWave[11] =  "ABS Parameters (3-6): "+proto[4]
412        labelWave[12] = "Average Choices: "+proto[5]
413        labelWave[13] = ""
414        labelWave[14] = "*** Data written from "+type+" folder and may not be a fully corrected data file ***"
415        labelWave[15] = "The detector image is a standard X-Y coordinate system"
416        labelWave[16] = "Data is written by row, starting with Y=1 and X=(1->128)"
417        labelWave[17] = "ASCII data created " +date()+" "+time()
418        //strings can be too long to print-- must trim to 255 chars
419        Variable ii
420        for(ii=0;ii<numTextLines;ii+=1)
421                labelWave[ii] = (labelWave[ii])[0,240]
422        endfor
423//      If(cmpstr(term,"CR")==0)
424//              termStr = "\r"
425//      Endif
426//      If(cmpstr(term,"LF")==0)
427//              termStr = "\n"
428//      Endif
429//      If(cmpstr(term,"CRLF")==0)
430//              termStr = "\r\n"
431//      Endif
432       
433        Duplicate/O data,spWave         
434        Redimension/S/N=(pixelsX*pixelsY) spWave                //single precision (/S)
435       
436        //not demo- compatible, but approx 100x faster!!
437       
438#if(cmpstr(stringbykey("IGORKIND",IgorInfo(0),":",";"),"pro") == 0)
439        Save/G/M="\r\n" labelWave,spWave as fullPath
440#else
441        Open refNum as fullpath
442        wfprintf refNum,"%s\r\n",labelWave
443        fprintf refnum,"\r\n"
444        wfprintf refNum,"%g\r\n",spWave
445        Close refNum
446#endif
447
448        Killwaves/Z spWave,labelWave            //don't delete proto!
449       
450        Print "2D ASCII File written: ", GetFileNameFromPathNoSemi(fullPath)
451       
452        return(0)
453End
454
455
456//// ASCII EXPORT in detector coordinates - mimicking the VAX CONVERT command
457// this is done simply to be able to produce converted raw data files that can be
458// read in with Grasp. A rather awkward structure, definitely not the preferred export format
459//
460// SRK 14 NOV 07
461//
462Function Fast2dExport_OldStyle(type,fullpath,dialog)
463        String type,fullpath
464        Variable dialog         //=1 will present dialog for name
465               
466        String destStr=""
467        String typeStr=""
468        Variable refnum
469       
470        destStr = "root:"+type
471       
472        //must select the linear_data to export
473        // can't export log data if there are -ve intensities from a subtraction
474        NVAR isLog = $(destStr+":gIsLogScale")
475        if(isLog==1)
476                typeStr = ":linear_data"
477        else
478                typeStr = ":data"
479        endif
480       
481        NVAR pixelsX = root:myGlobals:gNPixelsX
482        NVAR pixelsY = root:myGlobals:gNPixelsY
483       
484        Wave data=$(destStr+typeStr)
485        WAVE intw=$(destStr + ":integersRead")
486        WAVE rw=$(destStr + ":realsRead")
487        WAVE/T textw=$(destStr + ":textRead")
488
489        //check each wave - MUST exist, or will cause a crash
490        If(!(WaveExists(data)))
491                Abort "data DNExist AsciiExport()"
492        Endif
493        If(!(WaveExists(intw)))
494                Abort "intw DNExist AsciiExport()"
495        Endif
496        If(!(WaveExists(rw)))
497                Abort "rw DNExist AsciiExport()"
498        Endif
499        If(!(WaveExists(textw)))
500                Abort "textw DNExist AsciiExport()"
501        Endif
502
503        if(dialog)
504                PathInfo/S catPathName
505                fullPath = DoSaveFileDialog("Save data as")
506                If(cmpstr(fullPath,"")==0)
507                        //user cancel, don't write out a file
508                        Close/A
509                        Abort "no data file was written"
510                Endif
511                //Print "dialog fullpath = ",fullpath
512        Endif
513       
514/////////
515        String tmpStr=""
516        Variable numTextLines=17
517        Make/O/T/N=(numTextLines) labelWave
518       
519        sprintf tmpStr," '%s'   '%s'   '%s'",textw[0],textw[1],textw[2]
520        labelWave[0] = tmpStr
521        labelWave[1] = textw[6]         //label
522       
523        sprintf tmpStr," %d  %g  %g  %g",intw[2],rw[0],rw[39],rw[2]
524        labelWave[2] = tmpStr
525        labelWave[3] = " Cnt.Time(sec.)    Mon. Cnt.      Trans. Det. Cnt.  Tot. Det. Cnt."
526       
527        sprintf tmpStr," %g  %g  %g '%s' %g '%s' %d  %d  %g",rw[4],rw[5],rw[8],textw[7],rw[9],textw[8],intw[4],intw[5],rw[6]
528        labelWave[4] = tmpStr
529        labelWave[5] = " Trans.      Thckns       Temp.           H Field         Table  Holder  Pos"
530       
531        sprintf tmpStr," %g  %g  %d  '%s'  %g",rw[26],rw[27],intw[9],textw[9],rw[7]
532        labelWave[6] = tmpStr
533        labelWave[7] = " Wavelength &  Spread(FWHM)    Det.#  Type      Sample Rotation Angle"
534       
535        sprintf tmpStr," %g  %g  %g  %g  %g  %g",rw[18],rw[19],rw[16],rw[17],rw[21],rw[3]
536        labelWave[8] = tmpStr
537        labelWave[9] = " Sam-Det Dis.(m)   Det.Ang.(cm.)   Beam Center(x,y)  Beam Stop(mm)  Atten.No."
538       
539        sprintf tmpStr," %g  %g  %g  %g  %g  %g",rw[10],rw[11],rw[12],rw[13],rw[14],rw[15]
540        labelWave[10] = tmpStr
541        labelWave[11] = "        Det. Calib Consts. (x)           Det. Calib Consts. (y)"
542       
543        sprintf tmpStr," %g  %g  %g  '%s'  %g  %g",rw[23],rw[24],rw[25],"    F",rw[45],rw[46]
544        labelWave[12] = tmpStr
545        labelWave[13] = " Aperture (A1,A2) Sizes(mm)    Sep.(m)    Flip ON   Horiz. and Vert. Cur.(amps)"
546       
547        sprintf tmpStr," %d  %d  %d  %d  %g  %g  %g",intw[19],intw[20],intw[21],intw[22],rw[47],rw[48],rw[49]
548        labelWave[14] = tmpStr
549        labelWave[15] = "      Rows        Cols       Factor   Qmin      Qmax"
550       
551        labelWave[16] = " Packed Counts by Rows (L -> R) and Top -> Bot"
552         
553        //strings can be too long to print-- must trim to 255 chars
554        Variable ii
555        for(ii=0;ii<numTextLines;ii+=1)
556                labelWave[ii] = (labelWave[ii])[0,240]
557        endfor
558       
559        Duplicate/O data,spWave         
560        Redimension/S/N=(pixelsX*pixelsY) spWave                //single precision (/S)
561       
562//      now need to convert the wave of data points into row of no more than 80 characters
563// per row, comma delimited, not splitting any values
564        Make/O/T/N=0 tw
565       
566        Variable sPt,ePt,ind=0,len
567        sPt=0
568        ePt=0
569        len = pixelsX*pixelsY
570        do
571                tmpStr = Fill80Chars(spWave,sPt,ePt,len)
572                InsertPoints ind, 1, tw
573                tw[ind]=tmpStr
574                ind+=1
575//              Print "at top, ePt = ",ePt
576                sPt=ePt
577        while(ePt<len)
578               
579        Open refNum as fullpath
580        wfprintf refNum,"%s\r",labelWave                        //VAX uses just \r
581        wfprintf refNum,"%s\r",tw
582        Close refNum
583       
584        Killwaves/Z spWave,labelWave,tw         //clean up
585       
586        Print "2D ASCII File written for Grasp: ", GetFileNameFromPathNoSemi(fullPath)
587       
588        return(0)
589End
590
591Function/S Fill80chars(w,sPt,ePt,len)
592        Wave w
593        Variable sPt,&ePt,len
594       
595        String retStr
596        Variable numChars=1,numPt=0
597       
598        retStr = " "            //lines start with a space
599        do
600                if( (numChars + strlen(num2str(w[sPt+numPt])) + 1 <= 80)         && (sPt + numPt) < len )
601                        retStr += num2str(w[sPt+numPt]) +","
602                        numChars += strlen(num2str(w[sPt+numPt])) + 1
603                        numPt += 1
604                else
605                        // pad to 80 chars
606                        ePt = sPt + numPt
607                        //printf "%d : ", strlen(retstr)
608                        if(strlen(retStr) < 80)
609                                do
610                                        retStr += " "
611                                while(strlen(retStr) < 80)
612                        endif
613                        //Print strlen(retStr),sPt,ePt," : ",retstr
614                        break
615                endif
616        while(1)
617       
618        return(retStr)
619End
620
621//// end ASCII - old style export procedures
622
623
624//ASCII export of data as 3-columns qx-qy-Intensity
625//limited header information?
626//
627// - creates the qx and qy data here, based on the data and header information
628//
629// Need to ensure that the data being exported is the linear copy of the dataset - check the global
630//
631Function QxQy_Export(type,fullpath,dialog)
632        String type,fullpath
633        Variable dialog         //=1 will present dialog for name
634       
635        String destStr="",typeStr=""
636        Variable step=1,refnum
637        destStr = "root:"+type
638       
639        //must select the linear_data to export
640        NVAR isLog = $(destStr+":gIsLogScale")
641        if(isLog==1)
642                typeStr = ":linear_data"
643        else
644                typeStr = ":data"
645        endif
646       
647        NVAR pixelsX = root:myGlobals:gNPixelsX
648        NVAR pixelsY = root:myGlobals:gNPixelsY
649       
650        Wave data=$(destStr+typeStr)
651        WAVE intw=$(destStr + ":integersRead")
652        WAVE rw=$(destStr + ":realsRead")
653        WAVE/T textw=$(destStr + ":textRead")
654
655        SVAR gProtoStr = root:myGlobals:Protocols:gProtoStr
656        String rawTag=""
657        if(cmpstr(type,"RAW")==0)
658                Make/O/T/N=8 proto={"none","none","none","none","none","none","none","none"}
659                RawTag = "RAW Data File: "     
660        else
661                Wave/T proto=$("root:myGlobals:Protocols:"+gProtoStr)
662        endif
663        SVAR samFiles = $("root:"+type+":fileList")
664        //check each wave - MUST exist, or will cause a crash
665        If(!(WaveExists(data)))
666                Abort "data DNExist QxQy_Export()"
667        Endif
668        If(!(WaveExists(intw)))
669                Abort "intw DNExist QxQy_Export()"
670        Endif
671        If(!(WaveExists(rw)))
672                Abort "rw DNExist QxQy_Export()"
673        Endif
674        If(!(WaveExists(textw)))
675                Abort "textw DNExist QxQy_Export()"
676        Endif
677        If(!(WaveExists(proto)))
678                Abort "current protocol wave DNExist QxQy_Export()"
679        Endif
680       
681        if(dialog)
682                PathInfo/S catPathName
683                fullPath = DoSaveFileDialog("Save data as")
684                If(cmpstr(fullPath,"")==0)
685                        //user cancel, don't write out a file
686                        Close/A
687                        Abort "no data file was written"
688                Endif
689                //Print "dialog fullpath = ",fullpath
690        Endif
691       
692/////////
693        Variable numTextLines=18
694        Make/O/T/N=(numTextLines) labelWave
695        labelWave[0] = "FILE: "+textw[0]+"   CREATED: "+textw[1]
696        labelWave[1] = "LABEL: "+textw[6]
697        labelWave[2] = "MON CNT   LAMBDA (A)  DET_OFF(cm)   DET_DIST(m)   TRANS   THICK(cm)"
698        labelWave[3] = num2str(rw[0])+"  "+num2str(rw[26])+"       "+num2str(rw[19])+"     "+num2str(rw[18])
699        labelWave[3] += "     "+num2str(rw[4])+"     "+num2str(rw[5])
700        labelWave[4] = "BCENT(X,Y)   A1(mm)   A2(mm)   A1A2DIST(m)   DL/L   BSTOP(mm)   DET_TYP  "
701        labelWave[5] = num2str(rw[16])+"  "+num2str(rw[17])+"  "+num2str(rw[23])+"    "+num2str(rw[24])+"    "
702        labelWave[5] += num2str(rw[25])+"    "+num2str(rw[27])+"    "+num2str(rw[21])+"    "+textW[9]
703        labelWave[6] =  "SAM: "+rawTag+samFiles
704        labelWave[7] =  "BGD: "+proto[0]
705        labelWave[8] =  "EMP: "+proto[1]
706        labelWave[9] =  "DIV: "+proto[2]
707        labelWave[10] =  "MASK: "+proto[3]
708        labelWave[11] =  "ABS Parameters (3-6): "+proto[4]
709        labelWave[12] = "Average Choices: "+proto[5]
710        labelWave[13] = ""
711        labelWave[14] = "*** Data written from "+type+" folder and may not be a fully corrected data file ***"
712        labelWave[15] = "Data columns are Qx - Qy - I(Qx,Qy)"
713        labelWave[16] = ""
714        labelWave[17] = "ASCII data created " +date()+" "+time()
715        //strings can be too long to print-- must trim to 255 chars
716        Variable ii,jj
717        for(ii=0;ii<numTextLines;ii+=1)
718                labelWave[ii] = (labelWave[ii])[0,240]
719        endfor
720//      If(cmpstr(term,"CR")==0)
721//              termStr = "\r"
722//      Endif
723//      If(cmpstr(term,"LF")==0)
724//              termStr = "\n"
725//      Endif
726//      If(cmpstr(term,"CRLF")==0)
727//              termStr = "\r\n"
728//      Endif
729       
730        Duplicate/O data,qx_val,qy_val,z_val
731        Redimension/N=(pixelsX*pixelsY) qx_val,qy_val,z_val
732        MyMat2XYZ(data,qx_val,qy_val,z_val)             //x and y are [p][q] indexes, not q-vals yet
733       
734        qx_val = CalcQx(qx_val+1,rw[16],rw[18],rw[26],rw[13]/10)                //+1 converts to detector coordinate system
735        qy_val = CalcQy(qy_val+1,rw[17],rw[18],rw[26],rw[13]/10)
736
737        //not demo-compatible, but approx 8x faster!!   
738#if(cmpstr(stringbykey("IGORKIND",IgorInfo(0),":",";"),"pro") == 0)     
739        Save/G/M="\r\n" labelWave,qx_val,qy_val,z_val as fullpath       // /M=termStr specifies terminator
740#else
741        Open refNum as fullpath
742        wfprintf refNum,"%s\r\n",labelWave
743        fprintf refnum,"\r\n"
744        wfprintf refNum,"%8g\t%8g\t%8g\r\n",qx_val,qy_val,z_val
745        Close refNum
746#endif
747       
748        Killwaves/Z spWave,labelWave,qx_val,qy_val,z_val
749       
750        Print "QxQy_Export File written: ", GetFileNameFromPathNoSemi(fullPath)
751        return(0)
752
753End
754
755
756Function MyMat2XYZ(mat,xw,yw,zw)
757        WAVE mat,xw,yw,zw
758
759        NVAR pixelsX = root:myGlobals:gNPixelsX
760        NVAR pixelsY = root:myGlobals:gNPixelsY
761       
762        xw= mod(p,pixelsX)              // X varies quickly
763        yw= floor(p/pixelsY)    // Y varies slowly
764        zw= mat(xw[p])(yw[p])
765
766End
767
768//converts xyz triple to a matrix
769//MAJOR assumption is that the x and y-spacings are LINEAR
770// (ok for small-angle approximation)
771//
772// currently unused
773//
774Function LinXYZToMatrix(xw,yw,zw,matStr)
775        WAVE xw,yw,zw
776        String matStr
777       
778        NVAR pixelsX = root:myGlobals:gNPixelsX
779        NVAR pixelsY = root:myGlobals:gNPixelsY
780        //mat is "zw" redimensioned to a matrix
781        Make/O/N=(pixelsX*pixelsY) $matStr
782        WAVE mat=$matStr
783        mat=zw
784        Redimension/N=(pixelsX,pixelsY) mat
785        WaveStats/Q xw
786        SetScale/I x, V_min, V_max, "",mat
787        WaveStats/Q yw
788        SetScale/I y, V_min, V_max, "",mat
789       
790        Display;Appendimage mat
791        ModifyGraph lowTrip=0.0001
792        ModifyGraph width={Plan,1,bottom,left},height={Plan,1,left,bottom}
793        ModifyImage $matStr ctab={*,*,YellowHot,0}
794       
795        return(0)
796End
797
798
799//returns the path to the file, or null if cancel
800Function/S DoOpenFileDialog(msg)
801        String msg
802       
803        Variable refNum
804//      String message = "Select a file"
805        String outputPath
806       
807        Open/D/R/T="????"/M=msg refNum
808        outputPath = S_fileName
809       
810        return outputPath
811End
812
813// returns the path to the file, or null if the user cancelled
814Function/S DoSaveFileDialog(msg)
815        String msg
816        Variable refNum
817//      String message = "Save the file as"
818        String outputPath
819       
820        Open/D/M=msg/T="????" refNum
821        outputPath = S_fileName
822       
823        return outputPath
824End
825
Note: See TracBrowser for help on using the repository browser.