Ignore:
Timestamp:
Jun 16, 2008 4:00:54 PM (14 years ago)
Author:
srkline
Message:

Merging revisions 382:HEAD (=385) into the release branch for version 6.010

File:
1 edited

Legend:

Unmodified
Added
Removed
  • sans/Release/trunk/Install_Instructions.txt

    r366 r386  
    33(1) - Unzip the downloaded package 
    44(2) - Double click on the NCNR_Install_or_Update.pxp experiment 
    5 (3) - If there are any help files open, you will be asked to close them. NOTE: be 
    6         sure to hold down the option (or alt) key when closing them to kill them 
    7         not just hide them. 
     5(3) - If there are any help files open, you will be asked to close them. NOTE: be sure to hold down the option (or alt) key when closing them to kill them, not just hide them. 
    86(4) - Click on "Install SANS Macros" 
    9 (5) - When the installer is finished, you will be asked to Quit Igor (yes, do it, 
    10         and save changes to the experiment.) 
     7(5) - When the installer is finished, you will be asked to Quit Igor (yes, do it, and save changes to the experiment.) 
     8(6) - If you were informed that some folders did not have proper permissions, skip down to the section for "Manual Install" 
    119 
    12 - SANS_Reduction, USANS_Reduction, and Analysis templates are located in the same 
    13 folder as the installer (these are the starting points) 
     10- SANS_Reduction, USANS_Reduction, and Analysis templates are located in the same folder as the installer (these are the starting points) 
    1411- Example data for reduction and analysis are in NCNR_SANS_Utilities 
    15 - A folder with instructions and a template for writing your own analysis function 
    16 is included (Single_Model_Template) 
    17 - Help files are integral to each template. Open any of the templates and click 
    18 on "Help" or "?" from any of the panels to view the help files. 
    19 - Any previous installations, including any files you may have modified are moved 
    20 to the NCNR_Moved_Files folder. Look in here for anything that you may want to  
    21 save.  
    22  
     12- A folder with instructions and a template for writing your own analysis function is included (Single_Model_Template) 
     13- Help files are integral to each template. Open any of the templates and click on "Help" or "?" from any of the panels to view the help files. 
     14- Any previous installations, including any files you may have modified are moved to the NCNR_Moved_Files folder. Look in here for anything that you may want to save.  
    2315 
    2416 
     
    2719(1) - double click on the NCNR_Install_or_Update.pxp experiment 
    2820(2) - Click on "Check for Updates" 
    29 (3) - The updater will check the version installed versus the version available 
    30 on the NCNR website. If your version is out-of-date, you will be sent to the NCNR 
    31 website. 
    32 (4) If you need to update, download the current version (.zip), and run the installer 
    33 as in the first step. 
    34  
    35  
     21(3) - The updater will check the version installed versus the version available on the NCNR website. If your version is out-of-date, you will be sent to the NCNR website. 
     22(4) If you need to update, download the current version (.zip), and run the installer as in the first step. 
    3623 
    3724 
     
    4027(1) - double click on the NCNR_Install_or_Update.pxp experiment 
    4128(2) - Click on "Print Diagnostics" 
    42 (3) - Select and copy the entire contents of the notebook of diagnostics, and 
    43 paste it into an e-mail. 
     29(3) - Select and copy the entire contents of the notebook of diagnostics, and paste it into an e-mail. 
     30 
     31 
     32------------------------------------------------------------------- 
     33*** Manual Install of the NCNR SANS/USANS Procedures *** 
     34------------------------------------------------------------------- 
     35 
     36If you were directed by the installer to perform a manual install, it is most likely because you do not have the proper permissions to copy the files into the necessary subfolders of the Igor Pro application folder. 
     37 
     38------------------- 
     39First, if possible, contact your system administrator. See if it is possible to grant you full read/write access to these three folders: 
     40 
     41(on Windows) 
     42/Program Files/WaveMetrics/Igor Pro/Igor Help Files 
     43/Program Files/WaveMetrics/Igor Pro/Igor Extensions 
     44/Program Files/WaveMetrics/Igor Pro/User Procedures 
     45 
     46(on Mac OSX) 
     47/Applications/Igor Pro/Igor Help Files 
     48/Applications/Igor Pro/Igor Extensions 
     49/Applications/Igor Pro/User Procedures 
     50 
     51If you or someone can reset the permissions on these folders so you can read and write, then re-run the installer, and it should work correctly without errors. 
     52 
     53 
     54If you can't get full permissions, you may still be able to use the macros. You must have at a minimum, permission to install in /User Procedures. If you can't get permission to install into /Igor Help Files, you can still open the help files manually as needed. If you can't get permission to install into /Igor Extensions, your calculations will be much slower, and you will not have access to any of the 2D analysis functions. 
     55 
     56------------------ 
     57 
     58If you want to move the files and folders by hand, follow these steps, skipping those operations that you do not have permission to do: 
     59 
     60(0) Quit Igor, if it is open. 
     61 
     62(1) Clean out ALL of the older versions of the NCNR macros from the User Procedures folder. Move them to the trash/recycle, and be sure to EMPTY the trash/recycle. The files to remove will have a variety of names. See the listing at the bottom of this file. 
     63 
     64(2) Clean out all of the older versions of the NCNR Help Files from the Igor Help Files folder. Move them to the trash/recycle, and be sure to EMPTY the trash/recycle. Again, see the listing of possible names at the bottom of this file. 
     65 
     66(3) Clean out all of the older versions of the NCNR Extensions from the Igor Extensions folder. Move them to the trash/recycle, and be sure to EMPTY the trash/recycle. Again, see the listing of possible names at the bottom of this file. 
     67 
     68(4) From the downloaded package, move the entire folder NCNR_User_Procedures to the Igor Pro/User Procedures folder. 
     69 
     70(5) Move the entire folder NCNR_Help_Files to the Igor Pro/Igor Help Files folder. 
     71 
     72(6) In the NCNR_Extensions folder, move EITHER the Mac_XOP folder or the Win_XOP folder to Igor Pro/Igor Extensions, depending on your operating system. Delete the XOP for the platform that you are not using. 
     73 
     74(7) The NCNR_SANS_Utilities folder has the three templates for starting SANS or USANS Reduction experiment, and for an analysis experiment. If the templates open up correctly, you're likely OK. In this folder, there are also example data sets and a template for writing your own analysis model. 
     75 
     76 
     77------------------- 
     78"OLD" User Procedures could be any of the following: 
     79 
     80SANS_Reduction_v5.00 
     81SANS_Reduction_v5.0 
     82SANS Redn 28OCT03 
     83SANS Redn 18JUN04 
     84SANS Redn 23JAN04 
     85SANS Redn Beta 
     86SANS_Models_B 09MAY03 
     87SANS_Models (B) 
     88SANS_Models Beta 
     89SANS_Models Beta2 
     90SANS_Models_v3.00 
     91SANS_Models_v3.01 
     92USANS Procedures 13AUG02 
     93USANS_Procedures_14DEC04 
     94USANS_Procedures_15DEC05 
     95USANS Beta Procedures 
     96USANS Procedures v2.00 
     97USANS Procedures v2.20 
     98Put in User Procedures 
     99NCNR_User_Procedures 
     100NCNR_Extensions 
     101NCNR_Help_Files 
     102 
     103------------------- 
     104"OLD" Igor Help files could be any of the following: 
     105 
     106SANS_Reduction_Help_v5.ihf 
     107SANSReductionHelp_4p2.ihf 
     108SANS_Analysis_Docs_v3.00.ihf 
     109SANSAnalysisHelp(B).ihf 
     110SANS_Model_Docs_v3.00.ihf 
     111SANS_Model_Docs_v3.01.ihf 
     112USANSReductionHelp_v2.20.ihf 
     113USANSReductionHelp_v2.00.ihf 
     114USANSReductionHelp_v1.ihf 
     115SANS_Analysis_Docs_09JUN06.ihf 
     116SANS_Model_Docs_09JUN06.ihf 
     117Put in Igor Help Files 
     118NCNR_Help_Files 
     119 
     120------------------- 
     121"OLD" Igor Extensions could be any of the following: 
     122 
     123SANS_Analysis.xop 
     124NCNR_Extensions 
     125Mac_XOP 
     126Win_XOP 
     127------------------- 
    44128 
    45129 
    46130 
    47 May 2008 SRK 
     131 
     132June 2008 SRK 
Note: See TracChangeset for help on using the changeset viewer.