wiki:NCNROutput2D_pixel

Version 1 (modified by srkline, 14 years ago) (diff)

--

The 2D ASCII output files of SANS data are of the format below. It is simply a dump of the detector pixels that may or may not have gone through any correction steps. What corrections have been applied to the data depend on what (if any) reduction steps were applied before exporting the file.

In each file there is a header of information describing the sample information (gleaned from the raw data file) and information about the processing steps that were taken to generate the reduced data file. The data is in a single column format of detector counts (or corrected counts):

The 2D detector is a normal XY coordinate system when viewed from the neutron source. The single column of data is written row-wise, starting with Y=1 and X=1->128, that is starting from the lower left corner of the detector and working to the upper right. The current detector is square, 128x128 pixels.

No errors are currently carried with the data.

(only a snippet of the file is shown here)

FILE: SILIC009.SA3_SRK_S109   CREATED: 22-JAN-2008 02:39:11
LABEL: Silica 2 pct in D2O Scatt 1.3M                              
MON CNT   LAMBDA(A)   DET_OFF(cm)   DET_DIST(m)   TRANS   THICK(cm)
7.6329e+06  6       20     1.33     0.72501     0.2
BCENT(X,Y)   A1(mm)   A2(mm)   A1A2DIST(m)   DL/L   BSTOP(mm)   DET_TYP  
106.8  64.59  50  3  5.4675  0.142  50.8  ORNL  
SAM: RAW Data File: SILIC009.SA3_SRK_S109
BGD: none
EMP: none
DIV: none
MASK: none
ABS Parameters (3-6): none
Average Choices: none

*** Data written from RAW folder and may not be a fully corrected data file ***
The detector image is a standard X-Y coordinate system
Data is written by row, starting with Y=1 and X=(1->128)
ASCII data created Fri, May 9, 2008 10:54:08 AM

121
62
120
70
67
91
77
86
78
66
84
61
67
87
63


Back Up to Previous

Attachments (1)

Download all attachments as: .zip